Transmission Failure
 

Got in a bind today and stripped my Transmission Gear:lol::lol::lol:

http://i174.photobucket.com/albums/w...eardone009.jpg
http://i174.photobucket.com/albums/w...eardone001.jpg

I think thats the first tranny failure I've seen.

Me too:lol::lol::lol:
I guess 10 Cell's with a Hyperion 3013 is to much for it:lol::lol::lol:

damn man you stripped that good lol are you running the 3013 i sold you?

Me X3, the new slipper from Axial will solve that problem,

Yes, the first failed part on a Axial trans I have seen yet.

Motor and battery above^^^^^^^^^^
5lbs 6.8oz


http://www.rccrawler.com/forum/axial-ax-10-scorpion/104216-yotachumps-ax10.html

Yes, I love it :lol::lol::lol::lol:
Thanks Again for the motor:lol::lol::lol::lol:

glad to see your happy with it "thumbsup" how is the wheel speed on 10cells? I never ran more then 8 on it :lol:

NICE!

Time for steel gears.:lol:

Jesus... I'm surprised the tranny went first. I'd check them axles too. :lol:"thumbsup"

lockers were fine,But they were getting a little sloppy so I swapped them out for the New Era lockers;-)

How are the New Era Lockers? I was checking them out but didnt know if they were any better than stock.

I saw some a while ago, But don't remember who made them.
Who make's them??

Steel gears and steel outputs would be a nice addition to the Axial tranny. I was wondering how long it would last locked down with a 3013. I have quite a few of those motors and if you get them turning you will feel thier wrath!:lol:

Are ready for a slipper, I have a fix that is real easy.....

BTW-that motor was suposed to be mine, someone promised me 2 of them for a certian entry in the Mid-West comp....

I got the outputs covered,guess I need to find steel gears before I bolt up my 3025-8. My AX-10 tranny seems to be holding up fine with my 10 turn cobalt on 3 cells.

Wonder if Stealth tranny gears would fit? They look similar

Found the Aluminum gear set

http://www.hot-racing.com/?partnumber=SCP1000T&c=420

I think im going to stick with another stock set for now, that gear held up fine to that 3013 for month's of hard abuse.:lol::lol:

Well I ended up getting the Hot Racing aluminum gears because thats all the LHS had. they are very nice:lol::lol:, now what Is going break.:lol::lol:

I predict the aluminum outputs snapping or the factory lockers rounding out:mrgreen:

Thats what im thinking, if I break them I guess I need to get a SS set made like you:lol::lol:.

Factory lockers are already swapped out for the New Era ones;-)