|
| LinkBack | Thread Tools | Display Modes |
08-04-2009, 11:55 PM | #21 |
RCC Addict Join Date: Nov 2007 Location: BV
Posts: 1,170
|
I bet the R2 would fit in there nicely without spacers if you had the output side of the trans sticking out the open side rather than the motor side. Or you could relocate the dig servo and move the trans forward, allowing the motor to fit hanging out. Those open spaced plates look like a good place to get hung up on. Either way I bet you'll be really happy with that chassis and those wheels, I'm really happy with my LS2.0 and my 1.9 CDP's |
Sponsored Links | |
08-05-2009, 12:26 AM | #22 |
I wanna be Dave Join Date: May 2009 Location: Tehachapi,Ca
Posts: 2,334
|
i teid a couple diferent configurations but even with the tranny output hanging on the outher side it really put a bind on my driveline especially wen it articulated i ran real small spacers and they are actually as flush as the skid so we will see how it goes future plans involve locked ax10 trany and a dna dig just waiting to get all of it together first thanks for the input fellas keep it comin |
08-05-2009, 01:49 PM | #23 |
Newbie Join Date: Jun 2009 Location: Yuba City
Posts: 40
|
What kind of motor are you running, looks like one off one of my rc planes.
|
08-05-2009, 11:25 PM | #24 |
Rock Stacker Join Date: Dec 2008 Location: c-wood
Posts: 90
|
what length did you end up wit on your links? and can we get a pic of the bottom of the rig with the links on? |
08-06-2009, 12:07 AM | #25 |
I wanna be Dave Join Date: May 2009 Location: Tehachapi,Ca
Posts: 2,334
|
rigs done just waiting on my camara guys gonna paint body tomorrow anyone getin abadk9420 custom links just wait they are BADASS well worth the money guys thanks again curtis couldnt built this thing this nice without the advice
|
08-06-2009, 04:04 AM | #26 |
RCC Addict Join Date: Apr 2008 Location: Sacramento
Posts: 1,210
| Glad I could help you out, any timethanks for the props on the Links, It's good to know you are happy with the quality of your new upper and lower Delrin links I made you, now lets see some pics of this thing, LOL!!!! |
08-06-2009, 10:21 AM | #27 |
I wanna be Dave Join Date: May 2009 Location: Tehachapi,Ca
Posts: 2,334
|
the motor is a holmes hobbies crawlmaster sport 3014 CRAPLOADS of torque just not alot of wheelspeed.....till ya hook up a lipo lol
|
08-06-2009, 10:57 AM | #28 |
I wanna be Dave Join Date: May 2009 Location: Tehachapi,Ca
Posts: 2,334
|
welli got her done last night big thanks to abadk9420 and h8z2luz for the help here it is with the old body gonna pain the new on today and post asap |
08-06-2009, 11:16 AM | #29 |
RCC Addict Join Date: Apr 2008 Location: Sacramento
Posts: 1,210
|
As Borat would say "Is Very Nice" LOL!!!! well now you cant use ur truck as a excuse for your down fall any more because you got a BAD A$$ rig now |
08-06-2009, 12:40 PM | #30 |
Rock Crawler Join Date: Sep 2008 Location: Oroville, CA
Posts: 838
|
Looks so sick dude! Congrats im going to have to watch out for you now! What is your width now out side of tire to outside?
|
08-06-2009, 04:36 PM | #31 |
Pebble Pounder Join Date: Jun 2007 Location: Red Bluff ,California
Posts: 163
|
Looks Sweet Steve!! Im loving my Mayhem chassis. It performed better than I could of asked for at Oasis, It was just the dummy behind the throttle!! As soon as I get some free time we need to go run. Where did you get the NCVRCC sticker??? |
08-06-2009, 06:49 PM | #32 |
Rock Stacker Join Date: Sep 2008 Location: Eastern Oregon
Posts: 65
|
The red and black is How do you like those tires? |
08-06-2009, 10:18 PM | #33 |
I wanna be Dave Join Date: May 2009 Location: Tehachapi,Ca
Posts: 2,334
|
well shes done finally got the body today and did a little painting let me know what ya think |
08-06-2009, 10:23 PM | #34 |
Rock Crawler Join Date: Sep 2008 Location: Oroville, CA
Posts: 838
|
Looks bad ass man! Great job!
|
08-06-2009, 10:26 PM | #35 |
Quarry Creeper Join Date: May 2007 Location: NCVRCC
Posts: 346
|
That is one kick ass rig. Nice looking paint job, very simple and clean. Great build.
|
08-07-2009, 05:26 AM | #36 |
RCC Addict Join Date: Apr 2008 Location: Sacramento
Posts: 1,210
|
That came out BAD A$$, I bet it's gonna really sparkle in the sun light with all that metalic paint, the graphics look sick too |
08-07-2009, 11:23 AM | #37 |
Quarry Creeper Join Date: Jun 2009 Location: Tri-Cities
Posts: 309
|
nice truck, really turned out good. |
| |