RCCrawler Forums

Mechinary · 11-04-2009, 11:31 PM

Ok first off thanks for viewing and secondly constructive critisism is always welcome. This is my first build in the crawler side of Rc'ing so bare with me here for I am sure their is plenty that i don't know and some I do ...master of none and crafstmen of all...lol Ok on to the build.

I started off with my AX-10 stock ARTR and well made some changes and such.
Currently running :
55t Integy Motor
Stock but full droop suspension
Hammer Tires
Acer Digital DS-1015 Stering Servo
2.2 Mayhem Spider Beadlocks w/ Nuke Plus rings (Thank you Pimpnrocks for the great Deal)
Full Locked front and rear Axial Axles
XL-5 Traxxas ESC (water resistant)
and running a Spektrum DSM2.4ghz system for radio
Edge Chassis( thanks to Gary thanks for the great deal also!)

Now this build isn't complete as of yet I still have a few things I am waiting to get 4 link plates are in the mail, Dig unit wich I will have to wait till I can afford one, and misc. things that will have to wait. but this is so far...lol.

Here we go I'll let the pics speak for them selves!

sorry for the pics being all over but the uploader didn't like photo bucket's presets so....

Mechinary · 11-04-2009, 11:33 PM

This is what I originally started with of course most of you know but maybe for those that don't here it is!

KRAWL · 11-05-2009, 07:13 AM

Very nice! I love that hammered paint. Great start.

Mechinary · 11-06-2009, 11:46 AM

thank you

I know it's nothing special and has been done again and again but hey I'm new and well can't afford to dish out the dollars for the chassis I really want so figure i'll start small and work my way up...lol

11-04-2009, 11:31 PM	#1
Mechinary Newbie Join Date: Oct 2009 Location: Thousand Oaks Posts: 47	Mech's Axial AX-10 Build to edge AX10 Ok first off thanks for viewing and secondly constructive critisism is always welcome. This is my first build in the crawler side of Rc'ing so bare with me here for I am sure their is plenty that i don't know and some I do ...master of none and crafstmen of all...lol Ok on to the build. I started off with my AX-10 stock ARTR and well made some changes and such. Currently running : 55t Integy Motor Stock but full droop suspension Hammer Tires Acer Digital DS-1015 Stering Servo 2.2 Mayhem Spider Beadlocks w/ Nuke Plus rings (Thank you Pimpnrocks for the great Deal) Full Locked front and rear Axial Axles XL-5 Traxxas ESC (water resistant) and running a Spektrum DSM2.4ghz system for radio Edge Chassis( thanks to Gary thanks for the great deal also!) Now this build isn't complete as of yet I still have a few things I am waiting to get 4 link plates are in the mail, Dig unit wich I will have to wait till I can afford one, and misc. things that will have to wait. but this is so far...lol. Here we go I'll let the pics speak for them selves! sorry for the pics being all over but the uploader didn't like photo bucket's presets so.... Attached Images Last edited by Mechinary; 11-05-2009 at 12:14 AM.

11-04-2009, 11:33 PM	#2
Mechinary Newbie Join Date: Oct 2009 Location: Thousand Oaks Posts: 47	This is what I originally started with of course most of you know but maybe for those that don't here it is! Attached Images

11-05-2009, 07:13 AM	#3
KRAWL Quarry Creeper Join Date: Aug 2009 Location: Gamecock Country Posts: 284	Very nice! I love that hammered paint. Great start.

11-06-2009, 11:46 AM	#4
Mechinary Newbie Join Date: Oct 2009 Location: Thousand Oaks Posts: 47	thank you I know it's nothing special and has been done again and again but hey I'm new and well can't afford to dish out the dollars for the chassis I really want so figure i'll start small and work my way up...lol

Sponsored Links

RCCrawler Forums

Thread: Mech's Axial AX-10 Build to edge AX10