Extended EXT+15mm Wheel Hub & Wheel Axle for AX10 C22819

[alvaroguisso]

Extended EXT +15 mm Wheel Hub & Wheel Axle for AX10 C22819
[img]http://pics.towerhobbies.com/imagel/i/lintc9091.jpg[/ img].
Extended EXT+15mm Wheel Hub & Wheel Axle for AX10 for R/C or RC - Team Integy. Tt5NybJFudC
Has anyone bought or know of someone who has used
I wondered how that works will be on the rear axle.

[TrailDawg362]

I used that kit on my Axial based Wreckluse for more tire clearance. The kit works well, but after a few tumbles I broke the axle housing. The added width puts alot of strain on the axle cases, it snapped the plastic near the mounting point.

[alvaroguisso]

Originally Posted by TrailDawg362

I used that kit on my Axial based Wreckluse for more tire clearance. The kit works well, but after a few tumbles I broke the axle housing. The added width puts alot of strain on the axle cases, it snapped the plastic near the mounting point.

Ok more on the rear axle was needed any more changes or the parts that come with the kit are already enough
What about breaks I also bought:
All terminals in aluminum shaft

[AX10wannabe]

2 friends of mine run wheel wideners.. here is 1 friends rig it did front and rear with 15mm. here's his build thread. pic of wideners is on this page >my axial ax10 artr post #55

[TSK]

Buy beef tubes and run Junfac/GMade axle wideners.

Or buy the Longer beef tubes.

[alvaroguisso]

parts of intergy just arrived this week
Once I start building I post pictures.
tower hobbies parts bought in on 02/12 and delivered here in Brazil Sao Paulo home on 10/12
parabens tower hobbies

[burtonkidd]

Just picked these up for the wraith, figuring out how to install them ATM