RCCrawler Forums

BigJon · 03-31-2013, 01:39 PM

I have been slowly piecing together the supplies to build a 2.2s. What I have so far is a Evil Ringer chassis, transmission and axles of a SCX10, Plastic Wraith chub's, wild boar drive shafts, receiver, servo, esc, and motor.

Thanks to ittybitty over at ECRCHobbies I have the following on the way
Ax30450 Axial Flange Pipe 3x4.5x5.5
Ax30563 Axial Front Universal Set XR10
Ax80064 Axial Straight Axle Adapter Set XR10
Ax30090 Axial 61-90mm Aluminum Shock Set 7mm Piston
Ax30402 Axial Heavy Duty Bevel Gear Set - 43T/13T
Ax30401 Axial Heavy Duty Bevel Gear Set - 36T/14T
Vanquish Wraith, Ridgecrest, Aluminum Knuckles
Vanquish Locker for Axial Vehicles
Vanquish AX10 / SCX10 Shock Mount Razors

I have ordered Wraith Knuckle weight holders and an assortment of weights From RCBros. Also got two sets of wide splined Delrin tubes from Creation Fab.

I believe I have everything I need except for a body. Need to figure out what direction I want to go in.

I will get what little pics I have up soon.

I also ordered a set of custom Ti rear shafts from CREEPERBOB to fill my rear housing.

BigJon · 04-01-2013, 06:08 PM

Here is what I got so far.

Crawllife · 04-01-2013, 09:11 PM

Really look forward to seeing this! Our parts list is very similar.

BigJon · 04-06-2013, 02:13 PM

A package was waiting for me on Friday. Wish I got my tubes as well but Chris is running a batch through so I should have them the beginning of next week.

Sent from my Super Smart Smart phone using Midi-chlorians

ittybitty · 04-08-2013, 10:35 AM

Looking forward to seeing what you can do with a shafty truck

BigJon · 04-08-2013, 05:34 PM

Me too!! Maybe next season some time.

Sent from my Super Smart Smart phone using Midi-chlorians

BigJon · 04-16-2013, 07:04 PM

I received these from Chris yesterday. Guess I need to strip down my axles and start trimming. Also need to get with Ryan and get my order in.

Sent from my Super Smart Smart phone using Midi-chlorians

HARDKNOCKZ · 04-16-2013, 11:36 PM

Nice start & growing pile-o-parts. As Ryan said...Im lookin forward to whatcha come up with for this build.

J.D.

BigJon · 04-20-2013, 06:33 PM

Thismorning I got started on trimming my axle housing for Chris's tubes

Sent from my Super Smart Smart phone using Midi-chlorians

BigJon · 05-08-2013, 01:40 PM

Got a kick @$$ power plant! Also hit the easy button and helped a friend so now I have a full roller. I will have pics up later. Right now all I have is pics of the motor.

Sent from me using my DNA

ittybitty · 05-12-2013, 06:03 PM

Where's the updates

BigJon · 05-14-2013, 07:51 AM

I have been lazy There will be a big one after I get that stuf from you. I think I still need to figure out something else for the rear lower links they bind.

ittybitty · 05-14-2013, 07:54 AM

Since my 2.2 shafty thread disappeared mysteriously and noone can find it

I'll live vicariously through yours...how about that?

It's a roller

BigJon · 05-14-2013, 07:57 AM

That is how it sits right now. Gotta fix the suspension mount my electronics and paint and mount my body.

Sent from me using my DNA

ittybitty · 05-14-2013, 08:08 AM

Quote:

Originally Posted by BigJon

I have been lazy There will be a big one after I get that stuf from you. I think I still need to figure out something else for the rear lower links they bind.

They bind on what?

BigJon · 05-14-2013, 08:20 AM

Those bind on the drive shaft. I took the links off my UGC Viper that did not sell and those look like they work and they should be the same length. I need to check my WB. Was think ing about using the front links of the ugc with a trimmed down jato rod end to get the length right but I think that would be to low.

ittybitty · 05-14-2013, 08:23 AM

Somethings weird about your setup...let's check it out today when you come by.

BigJon · 05-14-2013, 08:35 AM

I was planning on grabbing it when I go over there. Also to I was going to bounce some ideas off you about electronics placement think It will work but I may need some heatshrink. Think I want it below the electronics plate between that and the drive shaft. Just don't know where can put the receiver. With the bat on top I am quickly running outa space.

ittybitty · 05-14-2013, 08:36 AM

I've got the ESC, BEC, and Rx under that plate...battery on top. Which ESC are you running?

BigJon · 05-14-2013, 08:41 AM

The fxr setup I got from you! For now at least maybe after Battle grounds I will swap over to Castle like all my other trucks. Did my rx's come in yet?

03-31-2013, 01:39 PM	#1
BigJon Quarry Creeper Join Date: Mar 2009 Location: Yokota Posts: 260	BigJon's Sportsman I have been slowly piecing together the supplies to build a 2.2s. What I have so far is a Evil Ringer chassis, transmission and axles of a SCX10, Plastic Wraith chub's, wild boar drive shafts, receiver, servo, esc, and motor. Thanks to ittybitty over at ECRCHobbies I have the following on the way Ax30450 Axial Flange Pipe 3x4.5x5.5 Ax30563 Axial Front Universal Set XR10 Ax80064 Axial Straight Axle Adapter Set XR10 Ax30090 Axial 61-90mm Aluminum Shock Set 7mm Piston Ax30402 Axial Heavy Duty Bevel Gear Set - 43T/13T Ax30401 Axial Heavy Duty Bevel Gear Set - 36T/14T Vanquish Wraith, Ridgecrest, Aluminum Knuckles Vanquish Locker for Axial Vehicles Vanquish AX10 / SCX10 Shock Mount Razors I have ordered Wraith Knuckle weight holders and an assortment of weights From RCBros. Also got two sets of wide splined Delrin tubes from Creation Fab. I believe I have everything I need except for a body. Need to figure out what direction I want to go in. I will get what little pics I have up soon. I also ordered a set of custom Ti rear shafts from CREEPERBOB to fill my rear housing. Last edited by BigJon; 04-10-2013 at 07:10 AM.

04-01-2013, 06:08 PM	#2
BigJon Quarry Creeper Join Date: Mar 2009 Location: Yokota Posts: 260	Re: BigJon's Sportsman Here is what I got so far.

04-01-2013, 09:11 PM	#3
Crawllife Fifth dimension Join Date: Oct 2012 Location: Quakertown Posts: 2,066	Re: BigJon's Sportsman Really look forward to seeing this! Our parts list is very similar.

04-06-2013, 02:13 PM	#4
BigJon Quarry Creeper Join Date: Mar 2009 Location: Yokota Posts: 260	A package was waiting for me on Friday. Wish I got my tubes as well but Chris is running a batch through so I should have them the beginning of next week. Sent from my Super Smart Smart phone using Midi-chlorians Last edited by BigJon; 04-08-2013 at 09:21 AM.

04-08-2013, 10:35 AM	#5
ittybitty I wanna be Dave Join Date: Oct 2008 Location: Sumter Posts: 6,141	Re: BigJon's Sportsman Looking forward to seeing what you can do with a shafty truck

04-08-2013, 05:34 PM	#6
BigJon Quarry Creeper Join Date: Mar 2009 Location: Yokota Posts: 260	Me too!! Maybe next season some time. Sent from my Super Smart Smart phone using Midi-chlorians

04-16-2013, 07:04 PM	#7
BigJon Quarry Creeper Join Date: Mar 2009 Location: Yokota Posts: 260	I received these from Chris yesterday. Guess I need to strip down my axles and start trimming. Also need to get with Ryan and get my order in. Sent from my Super Smart Smart phone using Midi-chlorians Attached Images

04-16-2013, 11:36 PM	#8
HARDKNOCKZ Its a HARDKNOCKZ Life... Join Date: Feb 2011 Location: Southern Kali... Posts: 2,469	Re: BigJon's Sportsman Nice start & growing pile-o-parts. As Ryan said...Im lookin forward to whatcha come up with for this build. J.D.

04-20-2013, 06:33 PM	#9
BigJon Quarry Creeper Join Date: Mar 2009 Location: Yokota Posts: 260	Thismorning I got started on trimming my axle housing for Chris's tubes Sent from my Super Smart Smart phone using Midi-chlorians

05-08-2013, 01:40 PM	#10
BigJon Quarry Creeper Join Date: Mar 2009 Location: Yokota Posts: 260	Got a kick @$$ power plant! Also hit the easy button and helped a friend so now I have a full roller. I will have pics up later. Right now all I have is pics of the motor. Sent from me using my DNA Attached Images

05-12-2013, 06:03 PM	#11
ittybitty I wanna be Dave Join Date: Oct 2008 Location: Sumter Posts: 6,141	Re: BigJon's Sportsman Where's the updates

05-14-2013, 07:51 AM	#12
BigJon Quarry Creeper Join Date: Mar 2009 Location: Yokota Posts: 260	Re: BigJon's Sportsman I have been lazy There will be a big one after I get that stuf from you. I think I still need to figure out something else for the rear lower links they bind.

05-14-2013, 07:54 AM	#13
ittybitty I wanna be Dave Join Date: Oct 2008 Location: Sumter Posts: 6,141	Re: BigJon's Sportsman Since my 2.2 shafty thread disappeared mysteriously and noone can find it I'll live vicariously through yours...how about that? It's a roller Last edited by ittybitty; 05-14-2013 at 08:08 AM.

05-14-2013, 07:57 AM	#14
BigJon Quarry Creeper Join Date: Mar 2009 Location: Yokota Posts: 260	That is how it sits right now. Gotta fix the suspension mount my electronics and paint and mount my body. Sent from me using my DNA Attached Images

05-14-2013, 08:20 AM	#16
BigJon Quarry Creeper Join Date: Mar 2009 Location: Yokota Posts: 260	Re: BigJon's Sportsman Those bind on the drive shaft. I took the links off my UGC Viper that did not sell and those look like they work and they should be the same length. I need to check my WB. Was think ing about using the front links of the ugc with a trimmed down jato rod end to get the length right but I think that would be to low.

Sponsored Links

BigJon's Sportsman - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BigJon's Berg	BigJon	EnRoute Berg	54	11-15-2013 07:52 AM
Bigjon's Wroncho project	BigJon	Axial SCX-10	56	11-19-2012 06:32 AM
My sportsman take 2	adamargue	Axial AX-10 Scorpion	2	07-31-2011 10:19 PM

05-14-2013, 08:23 AM	#17
ittybitty I wanna be Dave Join Date: Oct 2008 Location: Sumter Posts: 6,141	Re: BigJon's Sportsman Somethings weird about your setup...let's check it out today when you come by.

05-14-2013, 08:35 AM	#18
BigJon Quarry Creeper Join Date: Mar 2009 Location: Yokota Posts: 260	Re: BigJon's Sportsman I was planning on grabbing it when I go over there. Also to I was going to bounce some ideas off you about electronics placement think It will work but I may need some heatshrink. Think I want it below the electronics plate between that and the drive shaft. Just don't know where can put the receiver. With the bat on top I am quickly running outa space.

05-14-2013, 08:36 AM	#19
ittybitty I wanna be Dave Join Date: Oct 2008 Location: Sumter Posts: 6,141	Re: BigJon's Sportsman I've got the ESC, BEC, and Rx under that plate...battery on top. Which ESC are you running?

05-14-2013, 08:41 AM	#20
BigJon Quarry Creeper Join Date: Mar 2009 Location: Yokota Posts: 260	Re: BigJon's Sportsman The fxr setup I got from you! For now at least maybe after Battle grounds I will swap over to Castle like all my other trucks. Did my rx's come in yet?

RCCrawler Forums

Thread: BigJon's Sportsman