Szczerba’s 2019 Comp Sportsman “Enigma” Build Parts from a friend or two https://uploads.tapatalk-cdn.com/201...ec23aedaa9.jpg https://uploads.tapatalk-cdn.com/201...b94dead69d.jpg https://uploads.tapatalk-cdn.com/201...a69fe31a33.jpg https://uploads.tapatalk-cdn.com/201...8f0deee396.jpg https://uploads.tapatalk-cdn.com/201...07f29057bd.jpg Rear axle mock up before teardown and final assembly. Cut and narrowed gold Ottsix Voodoo pin tires and Crawler Innovations foams https://uploads.tapatalk-cdn.com/201...c65e81b5b7.jpg These front portal covers/weights/weight holders are very nice. https://uploads.tapatalk-cdn.com/201...4ff560b5be.jpg |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build Glad to see you sharing this build on rcc. Do you have more information about transmission? Reminds me of my scx10 ii Cherokee transmission. |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build Pretty snazzy! List what parts they are! |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build "thumbsup" |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build Quote:
Yo, when are you going to buy a vendor star and pimp all these cool products you are making? |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build I'm not into comp crawlers, but this thing just looks sick already! |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build Some fun looking parts for this one, i'm curious about what the ratio is on that transmission. |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
|
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build Axle shafts built and axles built. Final axle tear down and assembly is next. https://uploads.tapatalk-cdn.com/201...bb8545bee3.jpg https://uploads.tapatalk-cdn.com/201...e636425c0b.jpg https://uploads.tapatalk-cdn.com/201...d5d3022965.jpg https://uploads.tapatalk-cdn.com/201...111df02f09.jpghttps://uploads.tapatalk-cdn.com/201...9e275e6ef8.jpg https://uploads.tapatalk-cdn.com/201...fa4822e2eb.jpg |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build Hi, Could you show how it's inside portals and transmission ? |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build I would like to know more about the transmission as well. |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build Looks like it’s all “high altitude performance” parts |
Szczerba’s 2019 Comp Sportsman “Enigma” Build Quote:
Quote:
Had to cut axle shafts and do axle assembly first. I will take apart the transmission soon. Quote:
First picture of the thread shows those parts only. |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build Gonna have to get one now. But what colors.... |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build ive seen the prototype rig run a line on FB. nice color choice you got there Shane. the axles are giving me ideas for my sporty losi build.. I have to finish my super first though. |
Szczerba’s 2019 Comp Sportsman “Enigma” Build Transmission pictures. Cam style motor mount. Well thought out and practical. https://uploads.tapatalk-cdn.com/201...7cbd074bf5.jpg https://uploads.tapatalk-cdn.com/201...150a8e1b5c.jpg https://uploads.tapatalk-cdn.com/201...9a07001f4f.jpg https://uploads.tapatalk-cdn.com/201...8d1c43eea6.jpg https://uploads.tapatalk-cdn.com/201...dd3a1a7bb0.jpg https://uploads.tapatalk-cdn.com/201...a213c7989c.jpg https://uploads.tapatalk-cdn.com/201...4991987976.jpg https://uploads.tapatalk-cdn.com/201...e6335c7aa5.jpg https://uploads.tapatalk-cdn.com/201...e93b55ea84.jpg https://uploads.tapatalk-cdn.com/201...27b6f166e2.jpg |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build Looks sexy on there! I’ll send another color if you don’t like the red motor hoods contrasting the red tranny. Matching reds can be tough |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build Quote:
|
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build I wonder what the final gear reduction is from the pinion say a 18t to the final portal gear is on these rigs.. I am willing to bet a reversed gear portal losi axle setup would work really well with his trans setup. Sent from my LGMP260 using Tapatalk |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build Quote:
With a 12t pinion on the motor, the transmission is 7.25:1. With current portal gears. Front axle is 7.72:1 Rear axle is 6.51:1 |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build Got the rear axle final assembled. Rear has some negative camber built into the lockouts, so uni’s it is. I have regular portal box covers but leaving these weight holders on for now, in case rear weight is needed. https://uploads.tapatalk-cdn.com/201...bf0a6ba5a8.jpg Transmission and motor final installed. https://uploads.tapatalk-cdn.com/201...1ea8bdc2f3.jpg https://uploads.tapatalk-cdn.com/201...3e39b8bb93.jpg https://uploads.tapatalk-cdn.com/201...8d0928995d.jpg |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build Rear axle spinning faster than the front? Sent from my LGMP260 using Tapatalk |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build Quote:
|
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build Looks good on them shocks and shoes. Hint hint. Sent from my LGMP260 using Tapatalk |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build was TT factored in on the side the driveshafts were choosen to be on? awesome trans. what pin to pin measurement is your axle width closest to on an axial rig? SCX? XR? AR60? TSS building on road racers, and Shane building carbon fiber comp rigs. the demise of RCC is here:mrgreen: |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build Quote:
I'd have to measure the pin to pin. I was hastily hand hacking carbon fiber comp rigs back in 2011 ! http://www.rccrawler.com/forum/axial...f-sz-2-2s.html |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build These are 9.3” pin to pin and AR60’s are 9.65” pin to pin. |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build Great build. How much was the setup from high altitude performance? Also, how did you narrow the axle shafts (what tools did you use?)? |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build Quote:
|
Szczerba’s 2019 Comp Sportsman “Enigma” Build Foams and tires. Narrowed Ottsix Voodoo Gold Pins. Narrowed up a pair of silvers too. https://uploads.tapatalk-cdn.com/201...7771bd770a.jpg Crawler Innovations 5.5 and 6.0 double deuce comp cut narrow inners https://uploads.tapatalk-cdn.com/201...40d43097fa.jpg Random picture of the quality parts used in this build. Old comp body from 8 years ago painted by BC Paints! That I never threw away or sold. Vanquish Holmes Hobbies Castle Axial Dravtech https://uploads.tapatalk-cdn.com/201...f43aec405a.jpg |
Szczerba’s 2019 Comp Sportsman “Enigma” Build Also, found these Tattu 4s 450mahs 1.77x0.94x1.06in https://uploads.tapatalk-cdn.com/201...f965e93007.jpg https://uploads.tapatalk-cdn.com/201...6492ff681f.jpg |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build Cool build looking good! |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build Quote:
|
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build After you mentioned this today I had to check in on the progress. Loving it so far. |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build Very cool build! Excited to see some video of this beast. "thumbsup" |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build I really like this project! I'm curious about the rear camber, but it's different, and I like that. The only thing I'm not such a fan of is how wide the chassis is... |
Szczerba’s 2019 Comp Sportsman “Enigma” Build Quote:
Honing in the perfect setup every evening, one 650mah pack at a time. :ror: Quote:
Rear camber is for sidehill and uphill turning stability. All of the components were/are thought out and have a purpose. The chassis is "wide" to get the upper links close to perpendicular to the axle mounting points without having to add mega spacers (weak point) at the chassis. Also, it relates to shock positioning at the chassis and the axles. So, that translates into a car that needs very little tuning (compared to a setup with multiple tuning points) when it's bolted together and ready to run. It has two adjustment points on the upper links at the axle and an 1" or so adjustment at the chassis. Paired with the link/shock locations already designed to be "close" to great. Although, some may not like this chassis setup for their driving style, it is car that works super good with little previous knowledge of car setup. Just my $0.02. I haven't built a custom sporty comp crawler since 2012 and this car jumped me right to where I was in 2012 without the hours of hand cutting chassis and other components. |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build Itll never work - its just a fad :mrgreen::mrgreen::ror: 3D printing has def opened up a lot of options and Casey is finding them for sure. Nice seeing a veteran dabble in the comp side again. "thumbsup" |
Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build Bad ass build! You call it Enigma, but I think it's (Red)onkulous! |
All times are GMT -6. The time now is 01:23 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com