|
| LinkBack | Thread Tools | Display Modes |
12-27-2012, 02:37 PM | #1 |
Pebble Pounder Join Date: Mar 2010 Location: Muri Switzerland
Posts: 150
| Farmertom's 2.2s V1 (with AR60 axles)
I have for the "Best of West" Comp in Wendover U.S. in November still built a quick 2.2s crawler. First I wanted to go with my "old" Creeper, but since the Creeper was also my point of view too narrow axes, but then I quickly built yet a new crawler. The chassis I decided for the Secret Agent 4.0 chassis because I had gained a Comp in Switzerland, and it lying around unused. The axles are from my scale crawler, because I had this already equipped with Vanquish Knuckles. With the actual stroke of the crawler now has a track width of 295mm front and 285mm at the rear of. Some key figures: - Chassis: YTC Secret Agent 4.0 - Axis: Axial AR60 (Wraith) - Transmission: Axial SCX10 (Hot Racing Bullet proof) - Kardan: Junfac front, rear MIP Wraith - Shocks: Traxxas BigBore - Wheels: DLux Carbon Wheels I had the Skidplate for receiving the transmission build wider. Now she is about 70mm wide, so the transmission is on the right side of something Unfortunately, I was at the "Best of the West" Comp already on the course 2 a technical failure. The short front CVD is broken. |
Sponsored Links | |
12-27-2012, 06:20 PM | #2 |
Rock Crawler Join Date: Aug 2012 Location: Etowah
Posts: 533
| Re: Farmertom's 2.2s V1 (with AR60 axles)
Seeing this makes me want to start my build all over again. I love the break over clearance under the rear links.
|
12-27-2012, 08:58 PM | #3 |
Rock Stacker Join Date: Oct 2005 Location: Stationed in MO, born in TX.
Posts: 98
| Re: Farmertom's 2.2s V1 (with AR60 axles) |
12-28-2012, 02:25 AM | #4 |
Pebble Pounder Join Date: Mar 2010 Location: Muri Switzerland
Posts: 150
| Re: Farmertom's 2.2s V1 (with AR60 axles) |
12-28-2012, 05:44 AM | #5 |
Rock Crawler Join Date: Aug 2012 Location: Etowah
Posts: 533
| Re: Farmertom's 2.2s V1 (with AR60 axles)
I have had no problem with torque twist, even when mine was still on the factory frame. Gotta love these axles. I still can't get over the break over clearance and how you pulled it off with the offset pinions. |
12-28-2012, 08:06 PM | #6 |
Pebble Pounder Join Date: Apr 2012 Location: BritishColumbia
Posts: 100
| Re: Farmertom's 2.2s V1 (with AR60 axles)
What links are those
|
12-31-2012, 02:51 PM | #7 |
Pebble Pounder Join Date: Mar 2010 Location: Muri Switzerland
Posts: 150
| Re: Farmertom's 2.2s V1 (with AR60 axles) |
01-25-2013, 08:18 PM | #8 |
I wanna be Dave Join Date: Jan 2008 Location: GrandRapids, MILITIAGAN
Posts: 3,197
| Re: Farmertom's 2.2s V1 (with AR60 axles)
Good god man, how's she crawl?
|
01-26-2013, 03:57 PM | #9 |
RCC Addict Join Date: Apr 2009 Location: Behind the wheel
Posts: 1,107
| Re: Farmertom's 2.2s V1 (with AR60 axles)
Nice. |
01-28-2013, 10:09 AM | #10 |
Newbie Join Date: Jan 2013 Location: Sweden
Posts: 36
| Re: Farmertom's 2.2s V1 (with AR60 axles)
Hey Nice build. What hex hubs are u using?
|
LinkBacks (?)
LinkBack to this Thread: http://www.rccrawler.com/forum/axial-ax10-2nd-gen/419589-farmertoms-2-2s-v1-ar60-axles.html | ||||
Posted By | For | Type | Date | |
crawlerit | This thread | Refback | 03-05-2013 12:47 PM |
Farmertom's 2.2s V1 (with AR60 axles) - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Axial AR60 axles? | 2-shot | Axial Wraith | 1 | 07-07-2012 12:26 PM |
| |