Assembling spare parts for a RR10

[odomandr]

Current rig build sheet
Axial bomber chassis
Axial universal axle shafts
VP steering links
VP front upper and lower
VP Sway Bar
SuperShafty trailing arms
Hitec 7950 servo
Castle Mamba Max Pro esc
Holmes trailmaster pro 3300kv
Hot Racing metal spur
Robinson pinion
Mip drive shafts
Proline pro-spec shocks
Proline Hyrax 2.2 tires
CI single stage foams
Super shafty 2.2 SuperHawk wheels
Scalerfab front bumper
Scalerfab boat side sliders
Krawler Konceptz inside skinz

My wraith ar60 axles were sitting on a shelf when I stumbled across a complete cage, skid and transmission with HR metal spur. I tore the transmission apart and rebuilt it with fresh grease and an axial anodized motor plate.
Over the next few months I slowly acquired links trailing arms, links and other things that were not in the spare parts bin. I had a motor servo and esc that I had grabbed either used or when marked down.

While this was in the works,I built a Capra and had inside skins being designed so I bit the bullet on some bomber skins to match. I painted up an interior and the fuel cell and finally got it all together this past weekend when a local guy posted some shocks.

Unfortunately, the weather brought cold and snow and the stock plastic knuckles broke on me during the first real session. I was being stupid and dropping it from waist high to knock off some snow after bashing a bit. A stage 1 setup was in the list but this forced my hand a bit. The Bomber is a fun truck to crawl and bash with and was fun to put together as well.

Traded for the spares from the smt10 as it had axial aluminum upgrades in waiting. Bomber is back in action.