| |
| |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
04-26-2011, 11:51 AM
| #1 |
| Newbie Join Date: Feb 2011 Location: Lockhart, Texas
Posts: 39
|  homemade steering linkages
I did my linkages for the front and back, 4 link. I now want to do the steering. I am going to keep the servo on the axle as I prefer that. I have the linkage connecting both wheels bent up and ready to cut out of 8/32" all thread. I'm not sure how to do the upper steering linkage, the one from the servo to the knuckle. Do I some how connect it some where to the middle or to the knuckle? If to the knuckle I would need a new screw as that is a specialty screw.
|
|  |
| Sponsored Links | |
| | |
|
04-26-2011, 07:27 PM
| #2 |
| Rock Crawler Join Date: Sep 2004 Location: eureka
Posts: 577
|
you should already have a screw long enough, if not its 3mm and about 25mm long
|
|
| |
|
| Tags |
| link, linkage, links, steel, steering |
| |
Linear Mode
