Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Axial Brand Scale Rock Crawlers > Axial SCX-10
Loading

Notices

Thread: homemade steering linkages

Reply
 
LinkBack Thread Tools Display Modes
Old 04-26-2011, 11:51 AM   #1
Newbie
 
Join Date: Feb 2011
Location: Lockhart, Texas
Posts: 39
Default homemade steering linkages

I did my linkages for the front and back, 4 link. I now want to do the steering. I am going to keep the servo on the axle as I prefer that. I have the linkage connecting both wheels bent up and ready to cut out of 8/32" all thread. I'm not sure how to do the upper steering linkage, the one from the servo to the knuckle. Do I some how connect it some where to the middle or to the knuckle? If to the knuckle I would need a new screw as that is a specialty screw.
weiss27md is offline   Reply With Quote
Sponsored Links
Old 04-26-2011, 07:27 PM   #2
Rock Crawler
 
Join Date: Sep 2004
Location: eureka
Posts: 577
Default

you should already have a screw long enough, if not its 3mm and about 25mm long
yoda316 is offline   Reply With Quote
Reply

Tags
link, linkage, links, steel, steering



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 02:42 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com