Re: running 2.2 tires on a scx10
 

I was bored yesterday and slapped some 2.2 on my SCX10. Disappointed that I would have to a considerable amount of modification's to do. I like the idea of the larger foot print, but is it worth it or should i just buy a Wraith?

Re: running 2.2 tires on a scx10
 

I run 2.2 wraith rip saws with 15mm axle extentions. They work great.
Still a lot of tire to turn for the stock axles.

Re: running 2.2 tires on a scx10
 

This was the 2.2 combo my honcho came with. The truck is unchanged in this pic, the guy that owened it before had it dialed in pretty good.
http://i259.photobucket.com/albums/h...s/IMG00235.jpg

Here is scx-10 on 2.2 rockstars and my panel wagon body
http://i259.photobucket.com/albums/h...G00246-1-1.jpg

This is my current raptor hybrid on the same wheel and tire combo
http://i259.photobucket.com/albums/h...psc7f409f4.jpg

I bought my truck used with 2.2 badlands, which worked great just not the look I wanted. Tried a set of 1.9s from a friend, and got hung up all the time on the trails. Then I went to my current set up and it runs trails and climbs like a goat. Plus it has the look I was after, not a fan of tall 2.2s on this truck that's why I got one of the shortest 2.2s I could find that had a nice scale design.

http://img.tapatalk.com/d/12/10/09/e4u7umem.jpghttp://img.tapatalk.com/d/12/10/09/myvupu5a.jpghttp://img.tapatalk.com/d/12/10/09/9yba5u4y.jpg

I run 2.2 mashers on 2.2 rockstar wheels. My honcho is lifted on the very smallest setting on the level3rc liftkit i run a Hi-Tec 5646 and besides my homade links a spektrum setup a winch and a G.T. Light system its stock oh and a 4 link in the front.

Re: running 2.2 tires on a scx10
 

X2 I run with 1.9's and the other two guys I run with have 2.2's. There are times I cannot get up things they can, but there are just as many times they cannot get up what I can. Different rigs with different weights, but it all comes out in the wash. 1.9's forever :flipoff:

Somebody revived an old thread . . .

Re: running 2.2 tires on a scx10
 

Got a set of x4 Wraith Rip Saws off ebay for $34, I''m also running the Junfac wheel wideners. I'm liking the set up!

Re: running 2.2 tires on a scx10
 

Big size difference, but if you were close I would think about taking the 1.9s off your hands.

Re: running 2.2 tires on a scx10
 

Those are some damn good looking tires.

Re: running 2.2 tires on a scx10
 

I like the look and my granddaughter likes the way is runs over things (it's her rig).

Pro-Line Bronco body. LCC wheels with Pro-Line swappers. Summit fender flares.
Sent from my Desire HD using Tapatalk 2

Re: running 2.2 tires on a scx10
 

http://farm9.staticflickr.com/8228/8...399c1d87_c.jpg
IMG_1870 by Marc Brassard, on Flickr

Re: running 2.2 tires on a scx10
 

A friend brought an extra set of 2.2's with him on our last run. I threw them on just to try them out and this was the result. Floatation devices . . .

A friends sx10 in the water - YouTube

I have obviously been all for 1.9s and although it was fun (2.2s) for a short while, I was glad to put the 1.9s back on.

Re: running 2.2 tires on a scx10
 

did u had any problems by getting loose the nuts?

Re: running 2.2 tires on a scx10
 

anyone had any problems with junfac wideners,getting loose?

Re: running 2.2 tires on a scx10
 

Yes, I run a touch of red lock tight on them

http://img.tapatalk.com/d/13/05/19/gaqyrugu.jpg

Cool.. But less stable.
Spends more time on the roof now. I've since gone back to 1.9's


Sent from my highly abused iPhone using Tapatalk

Re: running 2.2 tires on a scx10
 

OK,THX for the info,i was planing on use red threadlock,just want to be sure that they are ok"thumbsup"

Back when I had the RC4WD 2.2 Rock Crushers. I have to admit after a complete drive train upgrade the rig was unstoppable. I am running the RC4WD tsl's now. They are a tall 1.9 so I still get excellent clearance with a better cog.


[IMG]http://i1202.photobucket.com/albums/...4-27164526.jpg[/IMG]
[IMG]http://i1202.photobucket.com/albums/...4-27164633.jpg[/IMG]

Sent from my SCH-I110 using Tapatalk 2

Re: running 2.2 tires on a scx10
 

I know this is an old thread, but was wondering if you use the +19mm offset or the +13mm offset in this rig setup? I like the way it looks.