Harley's Mighty SCX 1.9 Wraith Recently Mighty1 posted a thread rebuilding his 1.9 Wraith based truck, but instead of the typical way of putting SCX axles under a Wraith chassis he decided to adapt a SCX chassis to the cage. So simple! His thread can be found here --> CLICK! So last night while working in the shop I grabbed some pieces from the parts piles and started to throw something together. https://fbcdn-sphotos-c-a.akamaihd.n...4e66d04eb5bab7 Here is an intro video to the project. <iframe width="853" height="480" src="//www.youtube.com/embed/D43pYm2_acQ" frameborder="0" allowfullscreen></iframe> |
Re: Harley's Mighty SCX 1.9 Wraith The basis of this build is easy of building and easy access. Steve integrated a flip top, making everything under the chassis super easy to access. For my version I made an incredibly simple bracket to mount the cage off of. A piece of 16 gauge steel with two little bends and 4 holes. 10 minutes worth of work. https://fbcdn-sphotos-d-a.akamaihd.n...258a761cdd4eca It mounts to the rear most hole of the chassis. https://scontent-b-iad.xx.fbcdn.net/...b3&oe=545D385C The cage lays down on the chassis at a nice height. https://scontent-a-iad.xx.fbcdn.net/...24&oe=54759A06 But the best part is that it flips right up. https://fbcdn-sphotos-g-a.akamaihd.n...f5b098b314c698 |
Re: Harley's Mighty SCX 1.9 Wraith Now there was a little work done to make sure that everything cleared the SCX shock hoops. I wanted to use these hoops instead of the integrated Wraith hoops so that I could maintain the flip top. It required a little dremel work on the chassis was all. The outer frame rails in the rear were removed. Here you can see the rough cuts. https://fbcdn-sphotos-b-a.akamaihd.n...582503164f70ef The front frame rails and shock mounts were also removed. https://fbcdn-sphotos-g-a.akamaihd.n...66d97afd470af3 https://fbcdn-sphotos-a-a.akamaihd.n...89cbbc5e036d95 The rear shock mount piece was removed, and then I cut off the actual shock mount pieces so I could reinstall the cross piece for extra rigidity in the chassis. https://scontent-b-iad.xx.fbcdn.net/...84&oe=5474AF14 Lastly, since the lower section of the chassis is only used to mount the Wraith skid plate, it was removed to increase clearance. https://fbcdn-sphotos-f-a.akamaihd.n...00527c9cc1da51 |
Re: Harley's Mighty SCX 1.9 Wraith For the body, at this time I am planning to use this Proline JK Wraith body. It has a nice proportional look and fits well. https://fbcdn-sphotos-a-a.akamaihd.n...2c8b6d91600f7c The wheelbase when matching to the wheel arches sits about 11.75" total. https://fbcdn-sphotos-a-a.akamaihd.n...2c8b6d91600f7c https://fbcdn-sphotos-g-a.akamaihd.n...d6ee8aefe3c198 |
Re: Harley's Mighty SCX 1.9 Wraith SORRCA Another part of this build is that now that it uses frame rails, it is easy to say that it is class 2 legal. So from here on out, I will make sure to base my decisions on making sure I keep it legal and start raising the scale points of the truck. |
Re: Harley's Mighty SCX 1.9 Wraith Interesting build. Looks like fun. Especially if you can build it with mostly over the counter parts. ..Uploaded from the lab @ the C.I. Compound... |
Re: Harley's Mighty SCX 1.9 Wraith I'll be watching for sure. I've had this in mind since before the "Mighty Tack"... but I haven't had time in my weird ass 60+hr work weeks as of late. I'll follow your build closely. |
Re: Harley's Mighty SCX 1.9 Wraith Pretty cool idea |
Re: Harley's Mighty SCX 1.9 Wraith Will be interesting to see the final product! |
Re: Harley's Mighty SCX 1.9 Wraith This looks like its gonna be awesome. I got to lookin around after I read this thread and I have a the stuff lying around for this. May have to build one too. |
Re: Harley's Mighty SCX 1.9 Wraith I got the truck to a roller tonight, using only links I had laying around the shop. Regular G6 links for the uppers, and long and short Traxxas pushrods for the lowers to dial in the wheelbase a little closer. https://fbcdn-sphotos-a-a.akamaihd.n...8ee3e53f5053fa I used stock SCX shocks for the time being. I'm hoping to get my final ride height down to more of a 50/50 setup however. Right now it's taller than I'd like. Granted once I get all the junk in the truck I'm sure it will drop a little. https://fbcdn-sphotos-g-a.akamaihd.n...c159b67af56131 |
Re: Harley's Mighty SCX 1.9 Wraith Love the 1.9 Wraith and I agree, Mighty1's SCX frame is a cool idea. Looking forward to the awesome that this is destined for...."thumbsup" |
Re: Harley's Mighty SCX 1.9 Wraith Cool build... nice work I like the combo chassis design. And prefer the look of the 1.9 tires. tho' your axle width looks too wide for my liking. But then... I'm a scale addict and even think my scx-10 axles are to wide for true to scale proportions. those the Wraith axles ? look forward to your completion... and hopefully you'll post a video of it rolling "thumbsup" |
Re: Harley's Mighty SCX 1.9 Wraith Probably a dumb question but I haven't seen it covered yet. What holds the wraith cage down in the front? Anything or is the hinge setup tight enough you don't have to worry about it? |
Re: Harley's Mighty SCX 1.9 Wraith Quote:
https://scontent-b-iad.xx.fbcdn.net/...c1&oe=547C3039 |
Re: Harley's Mighty SCX 1.9 Wraith Quote:
This is with 475 or 600 front hubs, 225 rear hubs. All f which will get adjusted when the new wheels and tires come in. https://fbcdn-sphotos-b-a.akamaihd.n...2d8a59400efc0e https://scontent-b-iad.xx.fbcdn.net/...40&oe=5464B28A |
Re: Harley's Mighty SCX 1.9 Wraith I have looked at your pictures and information and you have my approval. Continue on as planned. |
Re: Harley's Mighty SCX 1.9 Wraith Quote:
|
Re: Harley's Mighty SCX 1.9 Wraith Quote:
Them 1.9 Growler's look good on that chassis/body setup. |
Re: Harley's Mighty SCX 1.9 Wraith Quote:
|
All times are GMT -6. The time now is 12:57 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com