|
| LinkBack | Thread Tools | Display Modes |
04-29-2015, 11:14 AM | #1 |
Rock Crawler Join Date: Oct 2011 Location: Canada
Posts: 593
| What does a $1350 Scx-10 look like? Surprisingly, It doesn't look like much. This is where I am at in a build, the Platform is almost complete. I wanted to build a platform that would last me for the next 4-5 years, so I invested in high quality parts where it counts, and didn't add any bling. I have been Keeping track of build costs along the way, first time I have done something like that. I am so shocked every time I look at the parts bill, then look at the truck. Where the hell did it all go? Now, keep in mind, these parts can be bought cheaper, but this is what I paid. I am up in Canada and shipping usually adds quite a bit of cost. So before commenting that I paid too much, or "x doesn't cost that much..", these are the actual amounts (rounded to the dollar) that I paid for these parts new over the last three years. *disclaimer- I know my tires are on backwards (for photos only), I know my rims are cheopo rims (but I love the look, and they hold a bead). And if you can relate, let's see some post of some high dollar, completely unimpressive builds |
Sponsored Links | |
04-29-2015, 11:19 AM | #2 |
Rock Crawler Join Date: Feb 2011 Location: Spur, TX
Posts: 541
| Re: What does a $1350 Scx-10 look like?
The trick to building a RC is to never keep track of the parts costs. I know I've got over 3k invested into my wraith over the years. If I was to start from scratch today I could do it all considerably cheaper. Just part of the learning curve. So what body and etc are you planning to run? |
04-29-2015, 11:34 AM | #3 |
I wanna be Dave Join Date: Jan 2005 Location: Raleigh-ish vicinity
Posts: 3,846
| Re: What does a $1350 Scx-10 look like?
If it will make you feel better, that's about $1,100 in US dollars based on the current exchange rate. I just got a GCM motor mount and transfer case kit for my Ascender and those are worth every loonie. I now believe no build can be complete without a GCM transfer case. |
04-29-2015, 11:58 AM | #4 |
20K Club Join Date: Jul 2004 Location: Sending illegals home one Hayabusa at a time.
Posts: 22,981
| Re: What does a $1350 Scx-10 look like?
All that money into it and you use a shit servo... I thought you wanted it to last? |
04-29-2015, 12:17 PM | #5 |
RCC Addict Join Date: Dec 2006 Location: Flatwoods
Posts: 1,036
| Re: What does a $1350 Scx-10 look like?
So I just looked up at the shelf above my comp that has my wife's, daughter's, and my scalers on it, did some mental math and shuddered a bit. It is amazing how fast it all adds up.
|
04-29-2015, 12:26 PM | #6 |
Scale Detail Engineering Join Date: Apr 2010 Location: Turtle Island
Posts: 5,573
| Re: What does a $1350 Scx-10 look like?
tires are on backwards and the shaft going from t-case to front axle looks like it could bind.
|
04-29-2015, 01:54 PM | #7 |
Pebble Pounder Join Date: Oct 2008 Location: Oshawa, Ontario Canada
Posts: 150
| Re: What does a $1350 Scx-10 look like?
Now Tim that's a cheap build compared to my new truck, I likely have close to $1000.00 just in Vanquish parts in mine. lol
|
04-29-2015, 02:13 PM | #8 |
Pebble Pounder Join Date: Oct 2008 Location: Oshawa, Ontario Canada
Posts: 150
| Re: What does a $1350 Scx-10 look like?
Yup just went to the Vanquish site and put all the parts I bought from them for my new truck in the cart and it came to $1062.82, with out shipping and that's before I went back and ordered my self a second set of Method wheels with SLP Hubs.....
|
04-29-2015, 02:24 PM | #9 | |
Rock Crawler Join Date: Oct 2011 Location: Canada
Posts: 593
| Re: What does a $1350 Scx-10 look like? Quote:
Shaft is fine, no binding through full suspension flex.. I am considering flipping the shafts, as someone pointed out a that they could hold water the way they are now, i thought that was a good tip... and the tires are on the right way, it's rear steer only. Last edited by Arctic Fire; 04-29-2015 at 02:28 PM. | |
04-29-2015, 07:42 PM | #10 |
Quarry Creeper Join Date: Oct 2012 Location: Malang, Indonesia
Posts: 338
| Re: What does a $1350 Scx-10 look like? |
04-29-2015, 08:08 PM | #11 |
Pebble Pounder Join Date: Oct 2008 Location: Oshawa, Ontario Canada
Posts: 150
| Re: What does a $1350 Scx-10 look like?
Been in the R/C Hobby almost 30 years spent a lot of money, but nothing close to the money spent on on my other hobby one of these and going to the drag strip as much as possible. lol |
04-30-2015, 10:05 AM | #12 |
Rock Stacker Join Date: Jul 2014 Location: Hillsboro
Posts: 70
| Re: What does a $1350 Scx-10 look like?
it is best not to think about the $$ and think about the enjoyment. I play with model trains and dare not tell my wife how much I have invested in them. One time added up how much a 30 car train with 3 engines pulling it was..nearly $2000 going by on the tracks. It is a hobby and as long as you are not taking away from a real need in life, have fun! |
05-01-2015, 10:21 PM | #13 |
Pebble Pounder Join Date: Nov 2011 Location: raceland
Posts: 144
| Re: What does a $1350 Scx-10 look like?
Same here I hate to think about what I have in my "toys" as some people call them. Right now just looking around my office $1800 in a yeti xl (just got it two months ago), custom homebuilt 1/10 monster truck around $700, around $500 in a modded redcat rockslide, $300 between 2 xmods micro rcs, and probably another $500 or more in random parts and pieces laying around from older builds that are sitting in the attic. It's horrible to add up what you spend to have fun, I use to spend plenty on parties and such when I was younger but now I just sit down with a beer and wrench on my rcs...either way it goes just have fun and keep the receipts hidden from the wife lol
|
05-02-2015, 10:15 AM | #14 | |
Rock Stacker Join Date: Sep 2005 Location: North Brookfield
Posts: 50
| Re: What does a $1350 Scx-10 look like? Quote:
full set of OMF wheels, set pf the regular axles they have, the 4 link set and probably something else i'm missing.. | |
05-02-2015, 11:18 AM | #15 | |
RCC Addict Join Date: Dec 2009 Location: Laceys Spring, Alabama
Posts: 1,067
| Re: What does a $1350 Scx-10 look like?
So your truck is rear steer? I'd be interested in seeing some more pics of this project. Quote:
| |
05-02-2015, 11:39 AM | #16 |
I joined the Band! Join Date: Dec 2014 Location: Earth
Posts: 1,188
| Re: What does a $1350 Scx-10 look like? |
05-02-2015, 11:45 AM | #17 |
RCC Addict Join Date: Mar 2010 Location: Yelm
Posts: 1,643
| Re: What does a $1350 Scx-10 look like?
Where in the world did you buy your growlers from?!?!?! $50 a pair??!!!?!
|
05-02-2015, 11:51 AM | #18 |
I joined the Band! Join Date: Dec 2014 Location: Earth
Posts: 1,188
| Re: What does a $1350 Scx-10 look like? |
05-02-2015, 11:55 AM | #19 |
RCC Addict Join Date: Mar 2010 Location: Yelm
Posts: 1,643
| Re: What does a $1350 Scx-10 look like?
Still. $29 a pair everywhere. That would be $40 shipping. Find that hard to believe. I have shipped to canada before plenty....
|
05-02-2015, 12:01 PM | #20 |
RCC Addict Join Date: Dec 2009 Location: Laceys Spring, Alabama
Posts: 1,067
| Re: What does a $1350 Scx-10 look like? |
What does a $1350 Scx-10 look like? - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
onyx 230 and thunderpower V2 3s 1350 | RickM | Electronics | 3 | 06-07-2010 03:59 PM |
Mamba max, 11.1 1350 mil 25c, 5955tg steering servo, 5645mg dig servo | BEAU | Electronics | 5 | 01-21-2009 02:36 PM |
| |