Re: Xtra Speed axle Installation was smooth. Everything fit well except (as some have mentioned) the inner bearing was super tight. I had to sand a bit in one axle. I just pushed harder and fought more on the second until it popped in. I had picked up the ARB diffs a while back; but, I have been waiting to install since I thought I would eventually end up with these axles. [IMG]<a data-flickr-embed="true" href="https://www.flickr.com/photos/68878541@N06/32696451622/in/dateposted-public/" title="ARB front"><img src="https://c1.staticflickr.com/3/2797/32696451622_0203df32fb_o.jpg" width="706" height="530" alt="ARB front"></a><script async src="//embedr.flickr.com/assets/client-code.js" charset="utf-8"></script>[/IMG] [IMG]<a data-flickr-embed="true" href="https://www.flickr.com/photos/68878541@N06/32696451392/in/dateposted-public/" title="ARB rear"><img src="https://c1.staticflickr.com/1/501/32696451392_00702eea1d_o.jpg" width="706" height="530" alt="ARB rear"></a><script async src="//embedr.flickr.com/assets/client-code.js" charset="utf-8"></script>[/IMG] [IMG]<a data-flickr-embed="true" href="https://www.flickr.com/photos/68878541@N06/32006922734/in/dateposted-public/" title="ARB rear angled"><img src="https://c1.staticflickr.com/1/496/32006922734_88cb23134e_o.jpg" width="706" height="530" alt="ARB rear angled"></a><script async src="//embedr.flickr.com/assets/client-code.js" charset="utf-8"></script>[/IMG] |
Re: Xtra Speed axle Quote:
|
Re: Xtra Speed axle After some serious beating, only some normal scuffs. I have to highly recommended these! https://uploads.tapatalk-cdn.com/201...743bcf2cff.jpg Sent from my SM-N910P using Tapatalk |
Re: Xtra Speed axle Looks awesome!!! Thanks for the pics |
Re: Xtra Speed axle Where did you get them for $28 for the pair? I just ordered a set from amazon for 50 shipped. I have a set of currie's and was getting ready to order another set until I came across this thread. Can't beat the price for a second or 3rd build. |
Re: Xtra Speed axle Got to test the strength today. Hit a rock with enough speed and force to break the case of my Savox 1230, axle shrugged it off. Sent from my SM-N910P using Tapatalk |
Re: Xtra Speed axle I gotta say, this was a good buy. I had to scrape the paint for the inside pinion bearing. The outside pinion bearing fits a little loose, but a tiny bit of blue locktite fixes the looseness, green lock tight would work best though. Shim the diffs and she good to go. |
Re: Xtra Speed axle Just ordered these myself. Pretty crazy, that the only Axial-branded parts I ordered for the "Axial AR44 axle" were the 2,6mm x 12mm screws and the locker/pinion bearings :shock: All else was Xtra Speed and SSD. Quote:
Should I by default shim it so that it is as close to the big bearing? Or as close to the spur gear as long as it still runs smoothly? |
Re: Xtra Speed axle Ordered mine on the 12th and they got delivered this morning. Hope to get them installed Monday. Any tips besides scraping the paint for the bearing ? |
Re: Xtra Speed axle Quote:
http://i1025.photobucket.com/albums/...pse8tjo9vd.jpg http://i1025.photobucket.com/albums/...psvaafnmej.jpg |
Re: Xtra Speed axle How are these holding up for everyone? I'm interested if they would last being smashed into rocks. |
Re: Xtra Speed axle Well, I ordered mine after seeing some of your all's comments about them. I went ahead and ordered the xtra speed steel driveshafts for the rear and their cvd shafts for the front. Also picked up a set of Samix aluminum steering knuckles as well. Can't wait for them to get here. |
Re: Xtra Speed axle Quote:
Anyone have any experience with these Xtra speed front and rear driveshafts? |
Re: Xtra Speed axle Quote:
zero issues |
Re: Xtra Speed axle Cool. Anyone have any experience with these Xtra speed front and rear driveshafts? |
Re: Xtra Speed axle Not driveshafts, Axle shafts |
Re: Xtra Speed axle Quote:
Does anyone have any experience with these Xtra speed front and rear axle shafts? |
Re: Xtra Speed axle Quote:
Sent from my XT1585 using Tapatalk |
Re: Xtra Speed axle Any pics with SSD parts on these axles? Skickat från min iPhone med Tapatalk |
Re: Xtra Speed axle Quote:
Yes, shim both the locker and pinion. On mines with the stock locker and ring, I put a .2mm on the pinion, and .4mm on the locker. The locker was sliding left to right. Shims should go between bearings and locker/ring. Sent from my iPhone using Tapatalk |
All times are GMT -6. The time now is 09:35 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com