07-04-2011, 05:40 PM | #1 |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
| Roland Rockshop Wraith Rebuild to Wrexo Heres one just like all the rest... for now.. My overall 1st impression of the wraith is its size.. if/when you get one you'll see..you just wanna throw a battery in it and see what it can do! Hats off to Axial for the ocp design..nice job! i see some unique applications for this axle.. Electrics are good-great for a rtr...2.4ghz radio rec esc is alot,ALOT better than the previous model esc.. servo..ehh ,still could use a lil bit more umpfh to power the steering duties. Battery placement could have been worked in up front.. that is my only complaint so far. Shocks are good,but will be replaced with alum adj shocks. or the stockers will be upgraded with axial alum shock bodies. Linkage is on par for a stock rtr.. upgraded linkage will be a must if you plan on bashing this beast with some hardcore trail running in mind. Steering linkage is still ok for stock..but definite on the upgrade list. Love the new cvd drivelines..well see how long these drive shafts hold up before becoming the next article in the parts pile. i like the splined shafts. Interior is a awesome job! many rigs are fixn to be spruced up with this intierior! im gonna run it with the stock electrics till something goes out or up in smoke! 1ST some minor changes.. headlight/taillight swap.. looks nasty right.. alum brake disc hexs..HR 38mm shock springs... dont know what brand these are,had them in my spring pile.. just a tad softer spring rate than the stock axial springs that come on the wraith..relocated shock mounts to 1st inner hole.. elec.. i relocated the power wires to go over tranny and hook up from underneath..nice and clean. steering.. ordered the cms steering kit from level3.. and made up some alum steering rods.. axles.. ordered the HR knuckles and c's.. paint diff covers,till someone makes an alum diff cover for the ocp axle.. tires.. for now i gonna run the piss outta the ripsaws.. only mods ive done on tires/wheels.. enlarge the vent holes on front wheels and cut the treads to let the tire carcass flex easier. 2nd custom Roland Rockshop sticker wrap from Freqeskinz 2.2 rc4wd claws or boggers 2.2 alum beadlocks?? 3rd intierior.. got a few neat ideas brewing.. Last edited by ROLANDROCKSHOP; 11-05-2013 at 10:21 AM. |
Sponsored Links | |
07-05-2011, 06:45 AM | #2 |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
|
thew on a set of rc4wd rockstar wheels/w sedonas just to see what theyd look like.. 2.2 baja claws fixn to replace the sedonas.. |
07-05-2011, 11:56 AM | #3 |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
|
just took it for a quick spin thru the RC ORV.. it eats up ground quick.. a bit big for it.. gonna have to do a long trail to run at pinnacle mtn visitors center.. |
07-05-2011, 12:12 PM | #4 |
Gold Star Baby Momma! Join Date: Feb 2004 Location: Maumelle, Ar
Posts: 713
|
I wanna go!!! Got a Cheeroke scx 10 from a guy off craigslist that is from Paragould. Just no time off work to do a run right now.
|
07-05-2011, 01:35 PM | #5 |
Rock Stacker Join Date: Aug 2009 Location: Crawlarado Springs
Posts: 64
|
Nice looking! I like all the mods so far! Where did you get the disk brake hexes?
|
07-05-2011, 01:55 PM | #6 | ||
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
| Quote:
Quote:
OR EBAY HOT RACING 38MM Last edited by THX_138; 12-31-2011 at 01:05 AM. Reason: Ebay links | ||
07-05-2011, 02:18 PM | #7 |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
|
trail cam! |
07-07-2011, 11:05 AM | #8 |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
|
goodies have arrived!! will be upgrading servo as well.. went out to pinnacle mtn to run the course i laid out... "Wraith KOH trail" didnt make it the 1st 100yrds and lost steering.. so i walked it,rather speed walked with camera at ground level.. @7-10min lap times judging from the video i took. gonna try it again this evening or 2mrw morning. video.. http://www.youtube.com/watch?v=vxAocWVsJe8 Last edited by ROLANDROCKSHOP; 07-08-2011 at 02:02 PM. |
07-07-2011, 01:49 PM | #9 |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
|
goodies.. |
07-07-2011, 02:00 PM | #10 |
I wanna be Dave Join Date: Oct 2007 Location: Castle Rock, WA
Posts: 8,785
|
Very nice. Damn you! I told you I wanted those wheels! |
07-07-2011, 03:24 PM | #11 |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
| |
07-08-2011, 12:35 PM | #12 |
I wanna be Dave Join Date: Jun 2006 Location: Ukiah
Posts: 5,357
|
We just picked up the Level3 RC Line hope to get the servo mounts real soon Looks like a nice setup
|
07-08-2011, 02:01 PM | #13 |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
| |
07-08-2011, 07:13 PM | #14 |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
|
stock servos gone..1 too many rock bounces.. inner gear case moves more than the servo arm.. hitec 645mg reported for duty..and was promptly installed.. Tried out the 2.2 rc4wd rok-locs this morning.. a bit to bouncy for this top heavy rascal.. not near as nice as the sedonas i ran the 1st run thru. trying these 2.2 wheels from TSS on some rovers 2mrw.. ..its resting..shh ..its been along day.. |
07-08-2011, 07:26 PM | #15 |
Gold Star Baby Momma! Join Date: Feb 2004 Location: Maumelle, Ar
Posts: 713
|
I might be able to pop away for a lil bit tomorrow???? Have to see what the honey do list looks like!
|
07-09-2011, 02:43 PM | #16 |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
|
honey, do go have fun and crawl!! is what i hear.. |
07-09-2011, 03:19 PM | #17 |
Gold Star Baby Momma! Join Date: Feb 2004 Location: Maumelle, Ar
Posts: 713
|
Tomorrow am fo sho, just txt me when you can go. I am in Drove mine around Lake Willastein behind the apartment. Wow, what a blast! Wish I had all by tools to tweak on it, ya know, Lower the cog, tighten slipper, change out servo Last edited by Tuffguy; 07-09-2011 at 03:23 PM. |
07-09-2011, 03:25 PM | #18 |
Quarry Creeper Join Date: Dec 2005 Location: the first state
Posts: 218
|
seeing as how i just broke an inner C, i am ordering those knuckles also. good thread, thanks. |
07-09-2011, 07:43 PM | #19 | |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
| Quote:
Will do! you can borrow my tools if need be.. | |
07-11-2011, 04:53 PM | #20 |
Gold Star Baby Momma! Join Date: Feb 2004 Location: Maumelle, Ar
Posts: 713
|
Post up that vid over here, you know the one of my Wraith playing turtle. Did you get any of the water video? Oh, and take care of that woman of yours......If you need anything let me know.
|
| |