07-17-2011, 10:54 PM | #1 |
Rock Crawler Join Date: May 2007 Location: Prescott
Posts: 796
| Winks Wraith
I was one of the lucky people to get a Wraith from the first shipment. I have been having a blast with this thing. I have run it on 2s and 3s and am happy with the 2s performance. The stock motor worked good for quite a while but I was wanting something with more power so I ordered up a HH 20T and have not looked back. This motor compliments the truck so well. I wont bore you with here is my truck brand new in the box pics My truck is stock except a Turnigy 5000 2s, vanquish knuckles, and an aluminum servo arm. One thing I did to keep the king pin screws from coming out so often is replace the stock course thread screws with 3m machine thread screws. They dont walk out anymore. My buddy's truck is stock with the exception of a Goat 2s system. Finally someone else got one and we went out to test them. I got stuck first and he tried to help we found a 15 foot tree branch to hoist them out of the mud since we couldnt walk out there. The mud nor water crossings that we continually drove through didnt cause a single problem for the trucks. At one point I nearly lost mine as it almost submarined. I pulled it out of the water and kept driving. Hard to imagine these things are ready to run trucks. Extreme durability! |
Sponsored Links | |
07-17-2011, 11:11 PM | #2 |
RCC Addict Join Date: Nov 2008 Location: Santa Fe, NM
Posts: 1,265
|
Hell Ya mud bath!! That's awesome do work |
07-17-2011, 11:22 PM | #3 |
RCC Addict Join Date: Aug 2007 Location: Burbank
Posts: 1,189
|
lolol.......is it like a 1.1 in the mud 5 min's of play and 5 hrs of clean up |
| |