Did I order the wrong parts? Knuckle/stub issue

[lowslowTJ]

So I have been slowly putting a Wratih axle under the front of my SCX-10 2.2 scaler. I ordered parts piecemeal. I now notice that the inner axle is just barely engaging the stub shaft. I must have the wrong part somewhere?

I am running:
Wraith inner axles
old, but lightly used AX-10/SCX-10 stub axles
XR-10 inner knuckles (They are the ones sold as replacement on Tower and on RPPs site for Wraith under the Wraith parts)
STRC Wraith grey aluminum knuckles
Bearings and diff from the old AX-10/SCX-10 axle

And yes those are STRC Wraith specific outer knuckles (unless they miss-labeled the package I checked and know the outer knuckles are different).

Are Wraith Stubs the same as AX-10/SCX-10 stubs?

Are the XR-10 inner Cs a different length than the Wraith inner Cs?

P.s. I know the outer knuckles are on backwards. I am gonna build my own 0 ackerman arms.

Pics:



Thanks for any help!

[War Pig]

Originally Posted by lowslowTJ

So I have been slowly putting a Wratih axle under the front of my SCX-10 2.2 scaler. I ordered parts piecemeal. I now notice that the inner axle is just barely engaging the stub shaft. I must have the wrong part somewhere?

I am running:
Wraith inner axles
old, but lightly used AX-10/SCX-10 stub axles
XR-10 inner knuckles (They are the ones sold as replacement on Tower and on RPPs site for Wraith under the Wraith parts)
STRC Wraith grey aluminum knuckles
Bearings and diff from the old AX-10/SCX-10 axle

And yes those are STRC Wraith specific outer knuckles (unless they miss-labeled the package I checked and know the outer knuckles are different).

Are Wraith Stubs the same as AX-10/SCX-10 stubs?

Are the XR-10 inner Cs a different length than the Wraith inner Cs?

P.s. I know the outer knuckles are on backwards. I am gonna build my own 0 ackerman arms.

Thanks for any help!

Pretty sure the Wraith stubs are longer and engage the dogbone farther in than the AX-10.

[gdb85]

They sure are, about a 1/4 inch.

[highhpcummins]

Originally Posted by gdb85

They sure are, about a 1/4 inch.

Yup found that out the other day. waiting for my axial universal shafts to get here.

[lowslowTJ]

Thanks for the info. Yea, I will just order some universal shafts.