|
| LinkBack | Thread Tools | Display Modes |
11-10-2011, 07:51 PM | #1 |
Rock Stacker Join Date: Nov 2011 Location: Summerville SC
Posts: 60
| tranny swap, wraith, ax10, scx10 interchangable?
The last weekspot I need to strenghen on my wraith, is the tranny. Im not looking to add a dig unit, was looking at the crkc all metal tranny for the ax10/scx10. Are they interchangable with the wraith? I know the direction is backwards on the drive, cause the tranny is turned 180 degrees compared to the scx10/ax10. Anyone done this? I havent found an all metal tranny advertised for the wraith yet. any ideas???
|
Sponsored Links | |
11-10-2011, 08:05 PM | #2 |
Rock Crawler Join Date: Feb 2011 Location: s. terra firma
Posts: 519
|
Get the vanquish scx ax10 case if you want to buy a new case. You could also buy a scx/ax10 plastic transmission case. All you need is a 2 pack of bearings (axa1225). Then get the 2 robinson racing gears. They replace the out drive. And the axa80010(idler gear?). Ive done the swap. |
11-10-2011, 08:47 PM | #3 |
20K Club Join Date: Jul 2004 Location: Sending illegals home one Hayabusa at a time.
Posts: 22,981
|
The Wraith case is different then the other kits. The VP case works if you plan on running a dig. Otherwise you end up needing a really long driveshaft. The case is not an immediate weak point, just the internals. |
| |