|
| LinkBack | Thread Tools | Display Modes |
11-09-2011, 05:21 PM | #1 |
Rock Crawler Join Date: Nov 2008 Location: missoula
Posts: 898
| Gearing for the timbuk 2 wraith edition 13.5 brushless
What would you guys recomend for good allaround gearing for crawling and running around dont want to overheat when crawling so i guess i want to gear for that more than the other. Thanks guys your always alot of help for us guys that dont know alot about these vehicles
|
Sponsored Links | |
11-09-2011, 05:30 PM | #2 |
Rock Crawler Join Date: Nov 2009 Location: poteau
Posts: 996
|
i'm running the 18.5t ballistic motor, and using 18t pinion, 87t spur. works good for me. i'm running 3s batteries and a mmp 1cell.
|
11-10-2011, 11:02 AM | #3 |
Rock Crawler Join Date: Nov 2008 Location: missoula
Posts: 898
|
so just stick the 20 pin and 80 stock spur back in
|
11-10-2011, 12:47 PM | #4 |
Rock Crawler Join Date: Nov 2004 Location: in a basement in Kalispell, MT
Posts: 857
| |
11-10-2011, 01:14 PM | #5 |
Rock Crawler Join Date: Nov 2008 Location: missoula
Posts: 898
|
i also hace ckrc 32 pitch i think 60 spur and 9-15 pinions if that would be a better starting place
|
11-10-2011, 02:27 PM | #6 |
Rock Crawler Join Date: Nov 2004 Location: in a basement in Kalispell, MT
Posts: 857
|
What are planning for batteries 2s?, 3s? How much capacity? With 3s gear lower.
|
11-10-2011, 02:42 PM | #7 |
Newbie Join Date: Jul 2011 Location: Alberta
Posts: 6
| |
| |