CMS Panhard kit VP or Level3

[Katan]

RC4WD as Wraith CMS too.

[hpiguy]

My VP CMS / panhard kit was bolt on and go also, no issues here whatsoever. The only extra thing I did was shave down the original servo plate tabs on the truss which was purely for clean looks.

[Devil Inc]

I have the VP setup on my rig, the RC4WD one looks nice. RPP just posted a new CMS setup from STRC, and it looks promising.

[Mnocton]

"Steer" clear of the Level 3 RC CMS with panhard, had it but took it off due to severe bump steer issues.

[Robert51483]

+1 for the VP Kit. Top notch and works and looks fantastic!

[Skizurp]

I couldn't be happier with my VP CMS set up.

[tcdawg]

Originally Posted by madkawi650

I have a level 3 kit.. It's absolute JUNK!!!

Weak weak weak aluminum, no hollow balls at connection points. No instructions at all. ( just a pile of parts) it took away all articulation. I never even took my wraith off the bench with it.. I just got mad and ripped it right back off.. It's in the " sell to a sucker" bin now. Lol

Save your nerves and buy a VP kit.
I got the Level3 CMS kit, the steering link kit and the lowering kit.. All junk.. The lowering kit might be ok and because of its low movement type of installation It'll likely work ok.. But it's cheap and you can feel it.

You get what you pay for !!!

I learned my lesson.


Sent from my highly abused iPhone using Tapatalk

none of my Vanquish stuff has come with instructions....

[madkawi650]

^^^
Yes but when the parts are well made and it's obvious where they go, it'd be ok.. The level 3 kit is just a mess of little plates and screws in a sandwich baggy.


Sent from my highly abused iPhone using Tapatalk

[DaJester]

Originally Posted by madkawi650

I have a level 3 kit.. It's absolute JUNK!!!

Weak weak weak aluminum, no hollow balls at connection points. No instructions at all. ( just a pile of parts) it took away all articulation. I never even took my wraith off the bench with it.. I just got mad and ripped it right back off.. It's in the " sell to a sucker" bin now. Lol

Save your nerves and buy a VP kit.
I got the Level3 CMS kit, the steering link kit and the lowering kit.. All junk.. The lowering kit might be ok and because of its low movement type of installation It'll likely work ok.. But it's cheap and you can feel it.

You get what you pay for !!!

I learned my lesson.


Sent from my highly abused iPhone using Tapatalk

I also made the mistake! No instructions, no phone number to call for support so I emailed and got the response "we don't have instructions to most of what we sell, you can assemble it from the pictures"

I was like WT_!

Invest in the VP kit...

[birdbrain9090]

What is the panhard link length? Vp doesnt sell the panhard kit anymore so im gonna build my own :3