|
| LinkBack | Thread Tools | Display Modes |
01-05-2013, 04:55 PM | #1 |
Pebble Pounder Join Date: Jan 2013 Location: Troutdale, Or
Posts: 111
| Home made Wraith droop, lift, first Wraith.
[IMG][/IMG][IMG][/IMG][IMG][/IMG]This is my first post here at RcCrawler. I've been in the hobby 20+ years and the industry just keeps getting better and better! I bought some 1/4" aluminum round stock and hardware. I used left over tie rod ends I had and started measuring and cutting. I have the cms set up so when I lift or droop the Wraith I have to change out the servo and cross stabilizer so the front end stays aligned. When in droop mode it's pretty stable. I need to buy longer shock shafts for better articulation. Here are a few pics if it. Any feedback or ideas for the garage builder would be cool. I now need to work on getting the pictures uploaded. Last edited by RcScott; 02-03-2013 at 01:32 AM. Reason: Add photo |
Sponsored Links | |
01-05-2013, 05:43 PM | #2 |
Rock Crawler Join Date: Aug 2012 Location: 909 area
Posts: 936
| Re: Home made Wraith droop and lift
pretty sweet i need me some of thems lol
|
01-05-2013, 08:15 PM | #3 |
Pebble Pounder Join Date: Jul 2012 Location: Chattown
Posts: 101
| Re: Home made Wraith droop and lift
Pretty cool! You might want to look at upgrading your center drive shafts, the rear is looking a little like a twisted liquorice stick.
|
01-05-2013, 11:06 PM | #4 |
Pebble Pounder Join Date: Jan 2013 Location: Troutdale, Or
Posts: 111
| Re: Home made Wraith droop and lift Yes I do. I am running a sidewinder sport in it with a 5000 mAh lipo. It likes to wheelie either in forward or reverse. So far it is bullet proof with no broken parts.
|
01-06-2013, 12:02 AM | #5 |
RCC Addict Join Date: Feb 2005 Location: Vancouver Island B.C.
Posts: 999
| Re: Home made Wraith droop and lift
I like the front shock setup you came up with, nice work |
01-06-2013, 12:38 AM | #6 |
I wanna be Dave Join Date: Dec 2012 Location: idaho
Posts: 2,658
| Re: Home made Wraith droop and lift
Kiss. Keep it stupid simple. Awesome mod. Sweet ride |
01-06-2013, 12:46 AM | #7 |
Pebble Pounder Join Date: Jan 2013 Location: Troutdale, Or
Posts: 111
| Re: Home made Wraith droop and lift |
01-24-2013, 05:17 PM | #8 |
Pebble Pounder Join Date: Jan 2013 Location: Troutdale, Or
Posts: 111
| Re: Home made Wraith droop and lift
I added front / rear MIP spline center CVD, a Robinson racing diff gear, and a RR idler gear.
|
01-25-2013, 08:28 PM | #9 |
Newbie Join Date: Mar 2005 Location: riverdale
Posts: 45
| Re: Home made Wraith droop and lift
That looks really good I'm going to give it a try
|
01-26-2013, 03:10 PM | #10 |
Pebble Pounder Join Date: Jan 2013 Location: Troutdale, Or
Posts: 111
| Re: Home made Wraith droop and lift I lengthened the rear and with the lower ride it should have great hill climbing ability.
|
01-26-2013, 03:11 PM | #11 |
Pebble Pounder Join Date: Jan 2013 Location: Troutdale, Or
Posts: 111
| Re: Home made Wraith droop and lift
Rear shot
|
01-26-2013, 03:12 PM | #12 |
Pebble Pounder Join Date: Jan 2013 Location: Troutdale, Or
Posts: 111
| Re: Home made Wraith droop and lift
Home made kinks with rc4wd tie rod ends.
|
01-26-2013, 03:14 PM | #13 |
Pebble Pounder Join Date: Jan 2013 Location: Troutdale, Or
Posts: 111
| Re: Home made Wraith droop and lift
One more. I am going to make a new rear shock mount. I'll bring the shocks towards the rear.
|
01-26-2013, 11:03 PM | #14 |
Pebble Pounder Join Date: Jan 2013 Location: Troutdale, Or
Posts: 111
| Re: Home made Wraith droop and lift
I made a new shock mount plate. I added two 1/4 cross bar supports.
|
01-26-2013, 11:05 PM | #15 |
Pebble Pounder Join Date: Jan 2013 Location: Troutdale, Or
Posts: 111
| Re: Home made Wraith droop and lift
Not bad for about a dollars worth of aluminum.
|
01-26-2013, 11:06 PM | #16 |
Rock Crawler Join Date: Aug 2010 Location: Saint Marys, OH
Posts: 934
| Re: Home made Wraith droop and lift
Looks like you're heading the right direction, looks great.
|
01-26-2013, 11:07 PM | #17 |
Pebble Pounder Join Date: Jan 2013 Location: Troutdale, Or
Posts: 111
| Re: Home made Wraith droop and lift
Top.
|
01-26-2013, 11:10 PM | #18 |
Pebble Pounder Join Date: Jan 2013 Location: Troutdale, Or
Posts: 111
| Re: Home made Wraith droop and lift
One more.
|
02-02-2013, 10:53 AM | #19 |
Pebble Pounder Join Date: Jan 2013 Location: Troutdale, Or
Posts: 111
| Re: Home made Wraith droop and lift
I added a spare tire sense I had one extra.
|
02-02-2013, 10:54 AM | #20 |
Pebble Pounder Join Date: Jan 2013 Location: Troutdale, Or
Posts: 111
| Re: Home made Wraith droop and lift
Mount.
|
Home made Wraith droop and lift - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Home made shovel | Constant Threat | Scale Accessories | 16 | 09-15-2015 07:52 AM |
Home Made. | Creepy Inc. | Chit Chat | 9 | 10-06-2010 08:48 AM |
Home made | raus | General Scale Talk | 17 | 09-27-2010 09:08 AM |
home made course | skate | General Crawlers | 6 | 03-07-2008 11:44 AM |
| |