K9 FaBs 2013 Ultra4 Car

[k9popo]

I usually do a build thread but here's my BUILT thread

I took 1" out of the rear and .5" out of the front to shorten it up...Then stood up the B pillars and chopped the roof to match the B pillars... Added some windsheild supports and other mods here and there...

Parts list:
Axial Wraith Kit (K9 treatment of course)
Tekin Pro4 3300
MMP
CC BEC
HiTec 7950TH
Axial servo Horn (these things are HD)
DC Rubi Body (K9 treatment chopped up)
Proline Powerstroke slash rear shocks
Proline Powerstroke slash front springs with internal springs as well
Pit bull tires
Gear Head RC EZ Locks
VP Knuckles
VP trusses
VP Diff covers
HR C hubs
CHAOTIC CRAWLERS 4 bend steering
Axial under drive HD rear R&P
MIP Shafts
HR hardened steal tranny gears
32p 60t spur
32p 13t Novak pinion

Still to come:
VP 5" Rigid light bar
VP Lockouts
Axial HD front R&P
Winch
Driver
Etc.







Still have to finish the fuel cell but you get the gist of it...

[slash 127]

that things cherry can you get a rtr to sit that low with the stock shocks?

[k9popo]

Originally Posted by slash 127

that things cherry can you get a rtr to sit that low with the stock shocks?

Yes you can

[JasonInAugusta]

I dig the subtle changes to the cage.

Nice fuel cell. Looks a bit familiar.

[k9popo]

Originally Posted by JasonInAugusta

I did the subtle changes to the cage.

Nice fuel cell. Looks a bit familiar.

Yeah I went simple and easy on it, nothing crazy like yours

I don't have the skills

[Pau Hana]

That looks good!!

[slash 127]

what do you do just flip the rear mounts and set it at full droop?

[dubAron]

Looks amazing great work

[Charel]

Dude that is one sweet looking Wraith...
How did you get it so low?
I have swaped my shock mounts over and its also not close to yours, did you chop the cage lower, cause I see a different side pillar in the cage...?
Great build

[JasonInAugusta]

Originally Posted by Charel

Dude that is one sweet looking Wraith...
How did you get it so low?
I have swaped my shock mounts over and its also not close to yours, did you chop the cage lower, cause I see a different side pillar in the cage...?
Great build

Answered the cage chop question in the first post. Also said he's running Slash Powerstroke rears with (shorter) front springs.

Originally Posted by k9popo

I took 1" out of the rear and .5" out of the front to shorten it up...Then stood up the B pillars and chopped the roof to match the B pillars... Added some windsheild supports and other mods here and there...

[Charel]

Jip, sorry my bad, was only looking at the pretty pics and not reading.....but thanx anyway

[k9popo]

Originally Posted by Pau Hana

That looks good!!

Thanks

Originally Posted by slash 127

what do you do just flip the rear mounts and set it at full droop?

I did flip the rear mounts but run it about 60-70% droop...

Originally Posted by dubAron

Looks amazing great work

Thanks

Originally Posted by Charel

Dude that is one sweet looking Wraith...
How did you get it so low?
I have swaped my shock mounts over and its also not close to yours, did you chop the cage lower, cause I see a different side pillar in the cage...?
Great build

Thanks JIA for fielding this one...

I did not lower the roof in anyway simply took some out to match the B pillars so there wasnt so much hangover

[bmf24]

i liked the old car but this one is pretty sweet too. it shows you do know how to make a slick lookin rig.

[k9popo]

Originally Posted by bmf24

i liked the old car but this one is pretty sweet too. it shows you do know how to make a slick lookin rig.

Thanks, this one is built pretty much the same underneath just different body and details which I'm still working on

[mojave450rider]

Hey where did you get that rear light housing from?

[slash 127]

Originally Posted by mojave450rider

Hey where did you get that rear light housing from?

Axial exo?

[k9popo]

Originally Posted by mojave450rider

Hey where did you get that rear light housing from?

here you go

Axial EXO Rear Light Bezel and Radiator Set

[knnphillips1990]

Where are y'all getting the scale fuel cells? Are they hollow so that you can store things in them?

Sent from my DROID RAZR using Tapatalk 2

[k9popo]

Originally Posted by knnphillips1990

Where are y'all getting the scale fuel cells? Are they hollow so that you can store things in them?

Sent from my DROID RAZR using Tapatalk 2

Make them out of styrene

Originally Posted by slash 127

that things cherry can you get a rtr to sit that low with the stock shocks?

Here's my sons Bday Present from 2 days ago, Bone stock and sitting just as low without flipping the rear mounts


I also found a filler and filter for the fuel cell

[Farmer]

I love it!!!! Your work never ceases to amaze me I'm jealous.
Later,
Farmer