4ws and rear sway bar ??
 

Anyone running both? Contemplating removing some of the rear bed, and relocating sway bar mounts. Anyone have any good pics of how to fit it all in there ?

Re: 4ws and rear sway bar ??
 

I'm sure it will fit but probably rub.

Re: 4ws and rear sway bar ??
 

All you'd be doing is mirroring the stock front swaybar / steering setup. Shouldn't rub unless your mount relocation puts it in the way of the shocks.

Re: 4ws and rear sway bar ??
 

Looking at my stock rsb flipping the mount forward would cause it to interfere with the shock. If you could fab a longer bar it would clear but at that point there would be a fair amount of flex at the ends making it less effective. Maybe some bar stock and mounts farther out would work.

Re: 4ws and rear sway bar ??
 

ive done the same thing with mine my servo horn on the rear servo hits the sway bar if I push down on the back I only lose 1/8 or less of travel never seen it hit when crawling my setup is taller then most like them
i use the med bar it seems to help get traction in some situations that i didn't before
i may try the weakest bar next if this one doesn't weaken a little it seems a bit to stiff for me
overall i do recommend putting it in rear
heres my thread with some pics hope it helps http://www.rccrawler.com/forum/axial...th-budget.html

Re: 4ws and rear sway bar ??
 

Thanks y'all!!