|
| LinkBack | Thread Tools | Display Modes |
07-27-2015, 11:01 AM | #1 |
Suck it up! Join Date: Mar 2008 Location: Arkansas
Posts: 11,652
| DCW Servo Winch Mount for your Wraith In just a few days (maybe sooner) DCW will be rolling out a new product for Wraith owners! Want to solidly and easily mount a servo winch? This is for you. This cnc machined aluminum mount attaches right to the cage using pre-existing bolt holes, and keeps the winch low enough to stick a rx on top of it and still close the hood. It also keeps it far enough back to clear axle mounted steering servos. I ran this part at Disney on my C2 Wraith and it worked like a champ. Pictured is the yet-to-be deburred final prototype. Under the hood... I always try to design my products so that there are no modifications needed to use them, but this one requires a small (very small) amount of work to instal. 1. Drilling out the holes in the frame so that the hardware will pass cleanly through is recommended. It's not completely mandatory, but it makes life easier if you do. 2. You will need to use a knife or file to trim down anything on the servo ears that would prevent them from sitting flat. Not all servos will need this attention. Better pictures and more details will come as I progress through production. Prices should be on par with most of my other items. If you have any thoughts, comments, questions, or concerns, please post them up. Thanks for looking, and thanks for supporting DCW. Last edited by Duuuuuuuude; 07-27-2015 at 12:48 PM. |
Sponsored Links | |
07-28-2015, 11:21 AM | #2 |
Suck it up! Join Date: Mar 2008 Location: Arkansas
Posts: 11,652
| Re: DCW Servo Winch Mount for your Wraith |
DCW Servo Winch Mount for your Wraith - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ultralite Delrin D-Mount from DCW | Duuuuuuuude | Chassis and Suspension | 239 | 08-05-2014 09:49 PM |
servo mount winch mount question | rcjunky3 | Axial Wraith | 0 | 12-10-2011 11:28 AM |
winch servo mount | gigercreeper | 2.2 Scale Rigs | 6 | 03-06-2009 04:19 PM |
| |