egressed viper 2

[sidehill]

Originally Posted by pastrana#199

Once the links are longer the aluminums will be lighter. It's because you ate using such thick aluminum.

Ill ck tonite

[ManxCrawler]

Is that ally link solid?

...thick walled ally won't need drilling and it'll be light and strong - my Al links are lighter than my Ti ones!

[sidehill]

Originally Posted by ManxCrawler

Is that ally link solid?

...thick walled ally won't need drilling and it'll be light and strong - my Al links are lighter than my Ti ones!

You guys are finding ally tube thats thick wall ? Obviously for 3 mm stud if your going light ?

[DickyT]

Originally Posted by sidehill

You guys are finding ally tube thats thick wall ? Obviously for 3 mm stud if your going light ?

4mm alu all-thread? In my shock caps (CO caps) I screwed a 4x16mm into the revo end and lopped off the button head, filed it down smooth, then loctited and screwed it into the shock cap. The capless alu 4mm screw does not even register on my scale

[sidehill]

Originally Posted by DickyT

4mm alu all-thread? In my shock caps (CO caps) I screwed a 4x16mm into the revo end and lopped off the button head, filed it down smooth, then loctited and screwed it into the shock cap. The capless alu 4mm screw does not even register on my scale

Yea i need to get a smaller scale to weigh stuff that small

[sidehill]

My 1/8" stainless rear uppers weigh the same as my old ti ones and there almost twice as long !!

[Fumbles]

Tag - this is getting interesting !