A HALL STYLE Chassis Lost in Korea :)

[OFFROADRCKOREA]

Originally Posted by GEARSCIENCE

my palms begin to sweat just thinking about driving a truck like that in a comp it would be a pile of broken cf and plastic after the first driver error lol looks amazing but dam does it all look brittle... either way, thats one bad ass looking setup

hey bud. If u go back and look at my previous post u can see where ive been through trial an error with this rig. It looks brittle but its not. Its reinforced in all the rifht places and takes a dang good beating honestly. All the parts are top of the line and it out last some of the carbon rigs here.
Lik

Originally Posted by Charlie-III

Nice looking rig, I like seeing what you've done each step.

I'm assuming you're using ~1/8" Lexan for the chassis? It bends well cold without cracking.
To prevent stress cracks, I use a "dull" drill bit so I don't leave "stress risers" in any holes. A quick/short countersink on each end of the holes helps transition the loads from the hole to the side material.

PS, for us "small screen" guys, hit "enter" after each picture so we don't have to scroll side to side..... thanks.....

Thanks bud. Its actual a .90 lexan or polycarbonate body. I actually drill tiny holes in tje most stressed areas of the body and it reduces alot of stess on the truck. I also already do exactly what u said and use a countersunk spacer on all the points of contact. Still puts my rig at only 4.4 pounds. Thanks for the tips and checking out my rig.

Lik


Thanks,
LIK

[OFFROADRCKOREA]

Just wanted share this pic with you pin tire lovers chaos, ibeams, voodoos and boss claws


Thanks,
LIK

[Hittman]

The new wheels are so sick man. I can't wait to see the other designs, and get my hands on some

[OFFROADRCKOREA]

Had the wheels out again today, beating them up and getting some good pics along the way, enjoy!!! Christian, we modified a set you requested today and will get it in 2 days, ill give you some pics and specs when i get it.














Hope you guys enjoy the pics!!!
LIK

[Hittman]

Dude! You are killing me with the pics! Awesome to hear you modded the set for me.

I will call you tonight

[OFFROADRCKOREA]

Hey Guys,
Got some great new pics of my rig with our new wheels. If you would like you can pre order them now. They will be available for shipping next week. We will have a vendor page up shortly detailing the wheels in full! They have been working beautiful!

Enjoy the pics!










Thanks for Looking
Brandon aka ORK

[Hittman]

Looking awesome man! I reeeeaaally can't wait for my set to get here. Congrats on the finish as well

[OFFROADRCKOREA]

A little update. Ripped the xr apart preparing it for next comp. I am trying to eliminate as much slop in the drive gears as possible. The rc4wd drive gear and a lightweight ckrc final is not the combo to use, way to much slop. I changed over to an axial lightweight hardened and cleaned it up alot. Well while I had it torn apart I had a couole beauties come in the mail from John over at Holmes hobbies. These are my new 500 pullers. They look sick. The new cans are just sweet these are the 16t crawler version. I will also be throwing my very own chassis on real soon so stay tuned for that beauty! Now for some pics!
The mess im dealing with.


A look back at my super sick, super smashed electronics


New motors from holmes 500 puller crawl motors

Look at this weight!

Old motors

Well that's
it. Thanks for looking!
Thanks,
ORK