XR10 stearing QUS

[paintchip31]

I have been looking for a while now and have seen lots but I am looking for who makes and a part number from the brass bushing for the knuckles . Anyone have this ?

[Constant Threat]

Dlux

Sent from my SM-G900V using Tapatalk

[paintchip31]

Originally Posted by Constant Threat

Dlux

Sent from my SM-G900V using Tapatalk

I have heard that those are very tight and hard to break in with VP stuff is there any others? Also thank you very much!!

[Robbob]

Vp makes their own

Knuckle Bushings (4pcs) - Vanquish Products


You could also use these - these are a Philips screw head ones
https://rcpcrawlers.com/product.php?...&cat=52&page=1


these are hex head low frictions ones - totally worth it.
Tamiya America Item #54237 | RC M05 Low Friction King Pin - 4pcs

Both of the Tamiya ones do away with the collar and are direct drop ins with smooth moving.

[Erik D_lux]

Originally Posted by paintchip31

I have heard that those are very tight and hard to break in with VP stuff is there any others? Also thank you very much!!

Thats not true 100% of the time...

It depends on the knuckles. If the knuckles tolerances are off, then yes, they will be tight (or loose). If you get Axial brand or get a set of VP that are right on the mark, youre good to go.

If they are tight, its pretty easy to dremel down to standard size that they should have been and doing this, you can get a perfect fit.

If you do go with a different brand bushing, you might get that guarantee to fit but the reason for that is that you will also have slop.

Its pretty easy to make something that assembles every time if its sloppy. It can be pretty tough to sell something that fits perfectly when you deal with a bunch of tolerances being off all the time.

[Stormin2u]

Dlux bushings fit my VP XR10 knuckles perfectly.

[paintchip31]

Originally Posted by Erik D_lux

Thats not true 100% of the time...

It depends on the knuckles. If the knuckles tolerances are off, then yes, they will be tight (or loose). If you get Axial brand or get a set of VP that are right on the mark, youre good to go.

If they are tight, its pretty easy to dremel down to standard size that they should have been and doing this, you can get a perfect fit.

If you do go with a different brand bushing, you might get that guarantee to fit but the reason for that is that you will also have slop.

Its pretty easy to make something that assembles every time if its sloppy. It can be pretty tough to sell something that fits perfectly when you deal with a bunch of tolerances being off all the time.

Not bashing your stuff at all please dont take it that way I have heard nothing but great things about DLUX

[paintchip31]

Got update this also. Not only did I place a order with DLUX man he had me tracking info in less then 20 mins DAMN that was fast!!!