03-14-2015, 08:03 PM | #1 |
Rock Crawler Join Date: Jul 2009 Location: roseburg
Posts: 636
| what size nut drivers
dose the kit come with them and what size i got a mip tool kit for it to 1.5 2.0 and 2.5 mm?
|
Sponsored Links | |
03-15-2015, 01:22 AM | #2 |
Newbie Join Date: Jun 2014 Location: over dare
Posts: 16
| Re: what size nut drivers
For this kit you will need 1.5, 2.0, 2.5 and 3.0mm hex drivers. The kit comes with some basic L type alen wrenches but I couldn't imagine trying to build this thing with those.
|
03-15-2015, 03:50 PM | #3 |
Rock Crawler Join Date: Jul 2009 Location: roseburg
Posts: 636
| Re: what size nut drivers
what size drivers in the book i see 4 and 3 is in mm in sizes a main dint see a 4 or 3 driver in tools
|
03-16-2015, 03:02 PM | #4 |
RCC Addict Join Date: Mar 2013 Location: Oklahoma City
Posts: 1,685
| Re: what size nut drivers
Vito, you see the thread size in 4mm and 3mm. What they dont show you is what size each screw driver is used for each screw. If you look in your manual on page 3, it will show you the required tools. This however is not entirely accurate. As mentioned above, you will need a 1.5, 2, 2.5 and 3mm hex drivers for this kit. If you have the MIP tool kit as you stated above, all you will need is a 3mm allen wrench for the 2 motor mount strap screws. The only tools that come in this kit are the standard Tamiya wrench and the large 4 way wrench - much like these: Amazon.com: Magnum Long Reach 4-Way RC Glow Plug Wrench: Toys & Games http://www.hobbyease.com/small-4-way...7mm-p2267.html Last edited by redsawacs; 03-16-2015 at 03:05 PM. |
03-16-2015, 03:17 PM | #5 |
Rock Crawler Join Date: Jul 2009 Location: roseburg
Posts: 636
| Re: what size nut drivers
ok cool i got them all now 3mm is in my losi race set thank you
|
what size nut drivers - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
metric nut drivers...I think | Wacki | Tools, and Procedures | 5 | 02-14-2014 04:30 PM |
Wheel nut size? | Spectactical | Axial Wraith | 3 | 11-18-2011 07:24 PM |
Wheel nut size? | MNorby | Axial AX-10 Scorpion | 2 | 05-19-2009 09:06 AM |
Craftsman nut drivers | nktrnl | Tools, and Procedures | 0 | 10-26-2006 09:07 PM |
| |