Re: Axial Yeti - Critical Dimensions, Parts compatibility, Gearing etc will the EXO front universal axles work (AX30415)? |
Re: Axial Yeti - Critical Dimensions, Parts compatibility, Gearing etc Quote:
|
Re: Axial Yeti - Critical Dimensions, Parts compatibility, Gearing etc Could someone measure the fuel cell box from the yeti,I was wondering the dimensions of it. |
Re: Axial Yeti - Critical Dimensions, Parts compatibility, Gearing etc Quote:
|
Re: Axial Yeti - Critical Dimensions, Parts compatibility, Gearing etc Quote:
|
Re: Axial Yeti - Critical Dimensions, Parts compatibility, Gearing etc great tread Josh;) I vote this to be a sticky |
Re: Axial Yeti - Critical Dimensions, Parts compatibility, Gearing etc Can we also add (either in this thread or a new one) a recommended upgrades list (or highlight the existing list). I know it'll be depends t on what you want to do, so let's say first recommended list is for durability or common bad parts out of the box. Just a thought now that more people have a yeti. |
Re: Axial Yeti - Critical Dimensions, Parts compatibility, Gearing etc +1 on a dedicated upgrade list for the Yeti |
Re: Axial Yeti - Critical Dimensions, Parts compatibility, Gearing etc Quote:
Quote:
|
Re: Axial Yeti - Critical Dimensions, Parts compatibility, Gearing etc Would a Tekin ROC 412 3100kV motor be compatible with the Yeti's stock ESC? I'm guessing no because I assume the ESC doesn't have a sensor port. Did I answer my own question? |
Re: Axial Yeti - Critical Dimensions, Parts compatibility, Gearing etc Quote:
|
Re: Axial Yeti - Critical Dimensions, Parts compatibility, Gearing etc Quote:
|
Re: Axial Yeti - Critical Dimensions, Parts compatibility, Gearing etc Quote:
|
Re: Axial Yeti - Critical Dimensions, Parts compatibility, Gearing etc Could you measure the outside dimensions of the fuel cell? And would a MMP fit in it? |
Re: Axial Yeti - Critical Dimensions, Parts compatibility, Gearing etc Quote:
|
Re: Axial Yeti - Critical Dimensions, Parts compatibility, Gearing etc I was watching your video last night of locking the front diff and was wondering if you had tried the 100,000 wt diff oil and if so how did it work on it? |
Re: Axial Yeti - Critical Dimensions, Parts compatibility, Gearing etc Quote:
|
Re: Axial Yeti - Critical Dimensions, Parts compatibility, Gearing etc Can you get the rear upper link eye to eye please? Gonna run that Dlux u4 truss and rear housing, but the truss typically needs a Jato to lengthen the link to fit on a wraith so I'm gonna need to make some tlinks o fit. |
Re: Axial Yeti - Critical Dimensions, Parts compatibility, Gearing etc Quote:
Adding the fuel cell dimensions now. |
Re: Axial Yeti - Critical Dimensions, Parts compatibility, Gearing etc 1 Attachment(s) Fuel Cell, also adding to the front page. These are rough but good enough for just about anything you guys probably need at a high level of planning. |
All times are GMT -6. The time now is 11:51 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com