can the SSD wide be used w/ the vanquish axle?

[8000ft]

I have the VP and I am running the sand paw tire/wheel combo and they are rubbing ever so slightly on the Jeep body.

Will the https://www.google.com/url?sa=t&rct=...kpioTCS2bTcL4w

work with the https://www.google.com/url?sa=t&rct=...t7lZUVyREo2s6g

???

[CamaroTom]

The Axial AR60 full width set runs 2 more bearings to better support the axle.

[8000ft]

i don't want to buy a whole new axle, I just want to widen the VP that I have.

[CamaroTom]

Yes Sir

Axial Racing - AR60 OCP Full Width Axle Adapter Set

[8000ft]

Compatible with all vehicles using AR60 axles. not clear about the VP axle

[oosel]

I ran that exact same setup. I had one problem with some rubbing and had to shim the left axle out. I ended up just buying a entire new widened rear end. In the long run it worked out much better. I did NOT have any rubbing with the stock rear end. It is a issue with the vanquish v2 rear end. I have a post in these forums about it somewhere with pictures.


here is the post found it
axle housing and wheel hex rubbing

Originally Posted by 8000ft

I have the VP and I am running the sand paw tire/wheel combo and they are rubbing ever so slightly on the Jeep body.

Will the https://www.google.com/url?sa=t&rct=...kpioTCS2bTcL4w

work with the https://www.google.com/url?sa=t&rct=...t7lZUVyREo2s6g

???

[8000ft]

Hummmm, interesting reading. I guess that I will live with the slight rubbing of the tires on the Pro-line Jeep body.

[oosel]

I bought this. SSD Wide Diamond Centered Rear Axle for Yeti (Black) solved all my problems.

[CamaroTom]

My Dlux big bearing AR60 housing with beef tubes, FI locker, and full width kit has been awesome. I also like the stealth factor, looks stock from the outside but is pretty much bomb proof inside. I'd consider this setup before buying an aluminum wide axle.