|
| LinkBack | Thread Tools | Display Modes |
08-12-2015, 04:43 PM | #1 |
Rock Stacker Join Date: Apr 2014 Location: Anaheim / Big Bear
Posts: 50
| homemade yeti metal bumper.
Well I hated the way the stock bumper started looking, it was all scratched to hell and started cracking (my 10 year old thought the yeti could fly) so I decided to make my own steel bumper. How hard can it be? (I used to build custom turbo manifold and systems back in the days) so It wasn't too hard, but it wasn't a cake walk either, eyeballed, most of it, by just copying over the stock design, changed it up a bit and added a mini stinger. I had most of materials already laying around the garage. Made my own tabs and skid plate, sand blasted and Powdercoated it flat black. All in all took about 3 hours to build Thoughts?, comments? Yes I know I need a tig welder for those Uber sexy welds. |
Sponsored Links | |
08-12-2015, 06:35 PM | #2 |
Newbie Join Date: Aug 2015 Location: Triangle
Posts: 1
| Re: homemade yeti metal bumper.
Did you weld it up with mig? Looks awesome.
|
08-12-2015, 09:19 PM | #3 |
Rock Stacker Join Date: Apr 2014 Location: Anaheim / Big Bear
Posts: 50
| Re: homemade yeti metal bumper.
Thanks, yes its mig welded, for stuff this small I found myself having to cut the welding wire down with snips before each weld. Very annoying, but very necessary so it wouldn't puddle up so much.
|
08-13-2015, 11:15 AM | #4 |
Quarry Creeper Join Date: Jul 2015 Location: Winter Park Colorado, 8000Ft Elevation
Posts: 345
| Re: homemade yeti metal bumper.
Looks super clean, I love DIY stuff.
|
08-13-2015, 11:23 AM | #5 |
Rock Stacker Join Date: Oct 2011 Location: milan
Posts: 73
| Re: homemade yeti metal bumper.
I need one of those for my yeti with a light mount .Let me know
|
08-14-2015, 06:41 AM | #6 |
RCC Addict Join Date: Mar 2012 Location: Under a Rock in North Texas
Posts: 1,389
| Re: homemade yeti metal bumper.
Man, that looks killer! Great work! Only thing I'd like to see, though, is maybe the skid plate welded completely in rather than tacked in a few spots. But it looks like it should hold up really well! Might have to commission you to build one for me soon!
|
08-14-2015, 07:56 PM | #7 |
Rock Stacker Join Date: Apr 2014 Location: Anaheim / Big Bear
Posts: 50
| Re: homemade yeti metal bumper.
The skid plate is on there pretty solid, has about 10 solid spot welds, didn't want to completely weld the whole thing on there and risk overheating and burning through the stainless sheet metal. I built one for a local friend and he's been beating the hell out of it daily for a few days now and it's still in tact. (Skid plate has a few dents, and the powder coat took a beating, but he showed them rocks who's boss) Home made parts 1 Stock parts 0 |
08-14-2015, 09:58 PM | #8 |
I wanna be Dave Join Date: Feb 2007 Location: BFE, NV
Posts: 2,324
| Re: homemade yeti metal bumper.
I like those front arms, Ive been running them on my Yeti.
|
08-14-2015, 10:02 PM | #9 |
I wanna be Dave Join Date: Jul 2013 Location: Minneapolis
Posts: 5,202
| Re: homemade yeti metal bumper. |
08-14-2015, 10:04 PM | #10 |
I wanna be Dave Join Date: Feb 2007 Location: BFE, NV
Posts: 2,324
| Re: homemade yeti metal bumper. |
08-14-2015, 11:46 PM | #11 |
Rock Stacker Join Date: Apr 2014 Location: Anaheim / Big Bear
Posts: 50
| Re: homemade yeti metal bumper.
I'm not too sure, probably topcad or something, got the whole front setup on asiatees for $50. Yeti took a digger off a 10ft ledge and snapped both stock plastic arms one hub and carrier and lost the kingpin. Stock axial parts were going to run almost the same. They are actually pretty tough. I've bashed into the curb at high speed numerous times and they haven't even bent. Probably going to sand blast or strip the anodizing off. |
08-15-2015, 12:03 AM | #12 |
I wanna be Dave Join Date: Jul 2013 Location: Minneapolis
Posts: 5,202
| Re: homemade yeti metal bumper.
Yeah I think they would look best raw. Sent from my VS986 using Tapatalk |
08-31-2015, 06:18 PM | #13 |
Quarry Creeper Join Date: Feb 2012 Location: Verdi, Nevada
Posts: 400
| Re: homemade yeti metal bumper.
You got skills son!!
|
08-31-2015, 08:58 PM | #14 |
Pebble Pounder Join Date: Feb 2007 Location: Ca 530
Posts: 182
| Re: homemade yeti metal bumper.
That looks killer nice work mister! |
09-01-2015, 03:55 PM | #15 |
Rock Stacker Join Date: Apr 2014 Location: Anaheim / Big Bear
Posts: 50
| Re: homemade yeti metal bumper.
Thanks for the compliments. Bumper is still holding up, scratched to hell. Lots of rocks up here in Big Bear ca Probably going to build a light bar guard, because that lightbar is taking a beating. |
09-01-2015, 04:13 PM | #16 |
Rock Stacker Join Date: May 2015 Location: Riverview-FL
Posts: 81
| Re: homemade yeti metal bumper.
What kind of light bar is that? and do you feel its bright enough? Ahemm Id like a light bar guard too let me know if you somehow make an extra lol.
|
09-04-2015, 11:18 AM | #17 |
Rock Stacker Join Date: Apr 2014 Location: Anaheim / Big Bear
Posts: 50
| Re: homemade yeti metal bumper. I have no idea, my coworker bought it online thinking it was a full sized light bar for his truck. Only to get a tiny box delivered (he didn't read the dimensions). He was mad as hell, and ended up giving it to me. It fit perfectly on the roof. Its a little tall but it's bright as hell on 3s and it's taken a beating.
|
09-17-2015, 01:53 AM | #18 |
Rock Stacker Join Date: Apr 2014 Location: Anaheim / Big Bear
Posts: 50
| Re: homemade yeti metal bumper.
Sold the old one to a friend, and built two of these today. Decided I wanted it to look more like the original one, just tough as nails. And I wanted a mount for my vp light bar. Up in bigbear it gets pitch black at night, and you can never have too much lighting. Powdercoated one matte black, and I love the way sandblasted metal looks, im going to just powdercoat the other one clear with a matte finish. |
09-17-2015, 02:48 AM | #19 |
Pebble Pounder Join Date: Sep 2013 Location: Portugal/Lisboa
Posts: 177
| Re: homemade yeti metal bumper.
Its perfect and aggressive too.
|
homemade yeti metal bumper. - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Homemade bumper mounts? | Cr00zah | Axial SCX-10 | 6 | 05-18-2014 05:54 AM |
HOMEMADE 25 cent Metal Skid Plate!! | shadowrejects | Losi Mini-Rock Crawler | 21 | 05-09-2010 11:47 AM |
| |