|
| LinkBack | Thread Tools | Display Modes |
10-05-2010, 08:38 PM | #1 |
Quarry Creeper Join Date: Feb 2009 Location: Ukiah
Posts: 290
| AX10 BTA Steering Kit for VP Knuckles
- Tired of having your steering linkages hang up? - Want a better approach angle? - How would you like to mount your battery on the axle? - Want front 4-link? - Already have Vanquish High Steer Knuckles or would like to run them? The LD Racing Products AX10 BTA Steering Kit for VP Knuckles is what you need! Material: 1/8" thick 6061-T6 Aluminum Kit includes: (1) tie rod, (1) vented servo tray, (2) spacers, (2) flange pipes (bushings) Compatibility Works with: Vanquish Products (VP) High Steer Knuckles Does not work with: Vanquish Products (VP) High Steering Zero Ackerman Knuckles MADE IN THE U.S.A. Only $18.99 Available exclusively from RPP Hobby: http://www.rpphobby.com/product_p/geaste002.htm Don't have VP Knuckles yet? Get them at RPP! Silver: http://www.rpphobby.com/product_p/vps01172.htm Black: http://www.rpphobby.com/product_p/vps01171.htm Last edited by Gear Head RC; 12-12-2011 at 07:49 PM. |
Sponsored Links | |
11-11-2010, 06:01 PM | #2 |
Quarry Creeper Join Date: Sep 2009 Location: Vancouver,Canada
Posts: 212
|
Order mine today now only 2 left at RPP WOW I have to say the shipping and processing @ RPP is lightning fast |
11-12-2010, 07:33 PM | #3 |
Newbie Join Date: Feb 2010 Location: Surrey
Posts: 39
|
Looking to pick up a BTA kit from you but I have the Axial Hi-clearance Knuckles will these work with them or do I have to use the one noted above??
|
11-13-2010, 09:23 AM | #4 |
Quarry Creeper Join Date: Feb 2009 Location: Ukiah
Posts: 290
| |
11-19-2010, 01:01 PM | #5 |
Newbie Join Date: Feb 2010 Location: Surrey
Posts: 39
| |
04-18-2011, 02:34 PM | #6 |
Quarry Creeper Join Date: Jan 2011 Location: Romania
Posts: 270
|
They dont ship to Romania. :(
|
05-17-2011, 07:13 PM | #7 |
Quarry Creeper Join Date: Apr 2011 Location: United States
Posts: 226
|
What lower link and servo horn is required for this because i cannot get it to work properly since the kunckles end their travel slightly under the plate
|
05-22-2011, 10:29 AM | #8 |
Rock Stacker Join Date: May 2011 Location: Lacey
Posts: 79
|
looks good, will they work well?
|
05-23-2011, 11:04 PM | #9 | |
Quarry Creeper Join Date: Feb 2009 Location: Ukiah
Posts: 290
| Quote:
Just about any aluminum servo arm will work well: http://www.rpphobby.com/SearchResult...arch=servo+arm I made a custom link with some 1/4" delrin rod, long 3mm set screws and rod ends, http://www.rpphobby.com/SearchResult...earch=rod+ends -Jim | |
05-23-2011, 11:07 PM | #10 |
Quarry Creeper Join Date: Feb 2009 Location: Ukiah
Posts: 290
| |
06-07-2011, 11:33 AM | #11 |
Scale Detail Engineering Join Date: Apr 2010 Location: Turtle Island
Posts: 5,573
|
What size (L" x W") is that battery on the plate? I'm about to order this but I need a 3s that'll fit. |
06-07-2011, 01:57 PM | #12 |
Quarry Creeper Join Date: Feb 2009 Location: Ukiah
Posts: 290
| |
06-07-2011, 02:06 PM | #13 |
Scale Detail Engineering Join Date: Apr 2010 Location: Turtle Island
Posts: 5,573
|
Perfect! I found a 3s 2000mah that'll fit. I'm sold. |
Tags |
ax10, axial, bta, ld racing, vanquish |
| |