RCCrawler Forums

Charlie · 06-20-2009, 08:20 PM

So is there any official word on a Nite Crawl??

What happened to that Redwood guy that brought it up for this week??

I'm going out to the garage to fix my CRV...... if you guys are going out, post up or gimme a call. I should be able to make it out, probably well after dark though.

bluc10 · 06-20-2009, 08:28 PM

Heading out to flat with Rich Dog in a bit I think Dave is going to.

Tim bring out your new truck so we can check it out.

Charlie · 06-20-2009, 08:39 PM

THanks Bluk, Shoot me a text if you guys leave before I get there please!

Charlie · 06-20-2009, 09:18 PM

CRV is fixed, Glue is dry and I added some safety zip ties!

Redwood · 06-21-2009, 01:16 AM

sorry fellas been at the hospital all day,Daughter crashed and burned playing on the asphalt

JPH Racing · 06-21-2009, 09:01 AM

Happy Father's Day to all you Dads out there!

Redwood, hope the little one is doing better!

MR.VERTICAL · 06-21-2009, 09:02 AM

MR.VERTICAL · 06-21-2009, 09:04 AM

Hey Cris go luck with the new job on monday. PS HAPPY FATHERS DAY TO ALL

Charlie · 06-21-2009, 11:26 AM

Night Crawl was cool. CRV held up and pulled some impressive lines from time to time. But I'm gonna make some changes to the front end for some approach angle.

We traipsed around the whole freaking place though. Good Times.

Redwood sorry to hear that, nothing's better then hanging out in the emergency room all night..... Ouch!

Merry Father's Day to all you mother fathers.......

MR.VERTICAL · 06-21-2009, 11:51 AM

Hey Charlie if you want to make a chasies for that rig let me know

Charlie · 06-22-2009, 10:18 AM

A Mr. V Custom CRV Chassis could be sweet......

We'll see how my bumper mod's turn out, if it goes like I'm thinking it might be all the CRV needs to be "good".

Charlie · 06-22-2009, 11:44 PM

Well, my CRV trimming is underway. I think it's gonna help a bit, but not as much as I was going for. I'm kinda limited to what I can remove as the body is held on in the front by a dohicky behind the front bumper...... But I should be able to make a sweet skid plate in place of the original plastic tube bumper, and mount some more LED's to the skid.

Rear bump removal isn't gonna help much But I did it anyway so it looks sweeter. Just gonna make some very simple tube bumpers and solder.

What you guys all been up to?

BigB_117 · 06-22-2009, 11:59 PM

Hey guys,

Just a heads up, I'm not gonna be able to make it to WCC. I sold my ticket this morning.

I'm flat broke atm and I just can't swing the cost of 2 days off work + trip expenses.

Have fun in Donner. Hopefully I make it up next year.

MR.VERTICAL · 06-23-2009, 12:00 AM

I think they are all getting ready for this weakend i know i am

JPH Racing · 06-23-2009, 09:27 AM

BigB: Bummer man! Hey, like me, there's always next year!

Best of luck to all that are going to the big event! It's gonna be a good one, lot's of high level talent to watch run and learn from!

On a side Note; Nathan turns 4 years old today!

Charlie · 06-23-2009, 09:43 AM

It's Tuesday right? Happy Tuesday Crualers

fernando · 06-23-2009, 10:46 AM

Happy B-Day Nathan from me and my family. My oldest just had her B-Day on the 18th. Wow I can still remember bringing her in her baby seat by your shop Jake when your dad use to work there. Tell your Father I said hello for me. So Jake when will Nathan be out on the rocks kicking our butts during comps? Until next time everyone take care.

talon02 · 06-23-2009, 12:29 PM

Going under the 101 today after work 4:15 4:30ish to practice for the Axial WCC, anyone else gonna be down there?

bluc10 · 06-23-2009, 08:28 PM

Were headin out on Wednesday night around 7ish under the 101 with the comp rigs till it gets dark (8:30-9:00) then to flat rock with the scalers.
Anybody down. So far its Charlie, Rich Dog, me and Dave?

lwarc · 06-23-2009, 09:25 PM

I will probably see you guys tomorrow night at Flatrock.

Quote:

Originally Posted by bluc10

Were headin out on Wednesday night around 7ish under the 101 with the comp rigs till it gets dark (8:30-9:00) then to flat rock with the scalers.
Anybody down. So far its Charlie, Rich Dog, me and Dave?

06-21-2009, 09:02 AM	#2047
MR.VERTICAL I wanna be Dave Join Date: Nov 2008 Location: Too old to care Posts: 2,446	How was the nite crawle,had to go out to dinner with family last nite,fathersday,

06-23-2009, 10:46 AM	#2057
fernando RCC Addict Join Date: Mar 2009 Location: In a very dark cave can't you tell... Posts: 1,708	Cool Happy B-Day Nathan from me and my family. My oldest just had her B-Day on the 18th. Wow I can still remember bringing her in her baby seat by your shop Jake when your dad use to work there. Tell your Father I said hello for me. So Jake when will Nathan be out on the rocks kicking our butts during comps? Until next time everyone take care.

06-23-2009, 08:28 PM	#2059
bluc10 Pebble Pounder Join Date: Jul 2008 Location: Windsor Posts: 131	Wednesday Night Crawlin Were headin out on Wednesday night around 7ish under the 101 with the comp rigs till it gets dark (8:30-9:00) then to flat rock with the scalers. Anybody down. So far its Charlie, Rich Dog, me and Dave?

06-20-2009, 08:20 PM	#2041
Charlie Rock Crawler Join Date: Jul 2006 Location: Hobbywing Posts: 552	So is there any official word on a Nite Crawl?? What happened to that Redwood guy that brought it up for this week?? I'm going out to the garage to fix my CRV...... if you guys are going out, post up or gimme a call. I should be able to make it out, probably well after dark though.

06-20-2009, 08:28 PM	#2042
bluc10 Pebble Pounder Join Date: Jul 2008 Location: Windsor Posts: 131	Heading out to flat with Rich Dog in a bit I think Dave is going to. Tim bring out your new truck so we can check it out.

06-20-2009, 08:39 PM	#2043
Charlie Rock Crawler Join Date: Jul 2006 Location: Hobbywing Posts: 552	THanks Bluk, Shoot me a text if you guys leave before I get there please!

06-20-2009, 09:18 PM	#2044
Charlie Rock Crawler Join Date: Jul 2006 Location: Hobbywing Posts: 552	CRV is fixed, Glue is dry and I added some safety zip ties!

06-21-2009, 01:16 AM	#2045
Redwood Pebble Pounder Join Date: Mar 2009 Location: Gualala CA Posts: 155	sorry fellas been at the hospital all day,Daughter crashed and burned playing on the asphalt

06-21-2009, 09:01 AM	#2046
JPH Racing RCC Addict Join Date: Aug 2007 Location: Rohnert Park Posts: 1,093	Happy Father's Day to all you Dads out there! Redwood, hope the little one is doing better!

06-21-2009, 09:04 AM	#2048
MR.VERTICAL I wanna be Dave Join Date: Nov 2008 Location: Too old to care Posts: 2,446	Hey Cris go luck with the new job on monday. PS HAPPY FATHERS DAY TO ALL

06-21-2009, 11:26 AM	#2049
Charlie Rock Crawler Join Date: Jul 2006 Location: Hobbywing Posts: 552	Night Crawl was cool. CRV held up and pulled some impressive lines from time to time. But I'm gonna make some changes to the front end for some approach angle. We traipsed around the whole freaking place though. Good Times. Redwood sorry to hear that, nothing's better then hanging out in the emergency room all night..... Ouch! Merry Father's Day to all you mother fathers.......

06-21-2009, 11:51 AM	#2050
MR.VERTICAL I wanna be Dave Join Date: Nov 2008 Location: Too old to care Posts: 2,446	Hey Charlie if you want to make a chasies for that rig let me know

06-22-2009, 10:18 AM	#2051
Charlie Rock Crawler Join Date: Jul 2006 Location: Hobbywing Posts: 552	A Mr. V Custom CRV Chassis could be sweet...... We'll see how my bumper mod's turn out, if it goes like I'm thinking it might be all the CRV needs to be "good".

Sponsored Links

06-22-2009, 11:44 PM	#2052
Charlie Rock Crawler Join Date: Jul 2006 Location: Hobbywing Posts: 552	Well, my CRV trimming is underway. I think it's gonna help a bit, but not as much as I was going for. I'm kinda limited to what I can remove as the body is held on in the front by a dohicky behind the front bumper...... But I should be able to make a sweet skid plate in place of the original plastic tube bumper, and mount some more LED's to the skid. Rear bump removal isn't gonna help much But I did it anyway so it looks sweeter. Just gonna make some very simple tube bumpers and solder. What you guys all been up to?

06-22-2009, 11:59 PM	#2053
BigB_117 RCC Addict Join Date: Jan 2009 Location: Sebastopol CA Posts: 1,525	Hey guys, Just a heads up, I'm not gonna be able to make it to WCC. I sold my ticket this morning. I'm flat broke atm and I just can't swing the cost of 2 days off work + trip expenses. Have fun in Donner. Hopefully I make it up next year.

06-23-2009, 12:00 AM	#2054
MR.VERTICAL I wanna be Dave Join Date: Nov 2008 Location: Too old to care Posts: 2,446	I think they are all getting ready for this weakend i know i am

06-23-2009, 09:27 AM	#2055
JPH Racing RCC Addict Join Date: Aug 2007 Location: Rohnert Park Posts: 1,093	BigB: Bummer man! Hey, like me, there's always next year! Best of luck to all that are going to the big event! It's gonna be a good one, lot's of high level talent to watch run and learn from! On a side Note; Nathan turns 4 years old today!

06-23-2009, 09:43 AM	#2056
Charlie Rock Crawler Join Date: Jul 2006 Location: Hobbywing Posts: 552	It's Tuesday right? Happy Tuesday Crualers

06-23-2009, 12:29 PM	#2058
talon02 Rock Stacker Join Date: Dec 2007 Location: Santa Rosa Posts: 75	Going under the 101 today after work 4:15 4:30ish to practice for the Axial WCC, anyone else gonna be down there?

RCCrawler Forums

Thread: Sonoma County Crawlers