RCCrawler Forums

SlinkySam · 03-15-2006, 08:43 PM

Well it was such a great time last weekend that we have to do it all over again, this time without the Mog breaking down. Ok Nor-Cal bruthas, it's time to hit the "near" Bean Hollow local again. For those that didn't catch Dean's detailed directions, we will be heading to a spot just north of Bean Hollow park itself this Sunday the 19th.

Now I have to end my day early because I have to help get my wife's studio open for business, so I will get there early. Anyone interested in an early crawl start? I want to leave my house around 7AM again and get in as much time possible. There are just too many lines out there that have Slinky's name on it.

If anything, I will catch you guys when you get there.

-Sam

badger · 03-15-2006, 09:00 PM

I am up in the air on this one. I have a lot of building to do so if I get enough done between now and Sunday they hopefully.

I will drive the Honda out so I can jam there and back in a hurry if I can't spend the whole day.

kickback_crawler · 03-15-2006, 09:38 PM

i can make it just let me know the time you are going to be there and im there DuDe!!!!

blue devil toyota · 03-16-2006, 11:31 AM

I'll try to make it. Sam what time are you leaving. I may just follow you.

Over-Rev · 03-16-2006, 09:47 PM

I dunno if Ill be able to make it,Waiting on SW2 chassis and shock's

51504rock · 03-16-2006, 10:55 PM

i will try and make it but how do you get there?

chino63 · 03-17-2006, 12:22 AM

here you go

Maneuvers Reverse Route | Avoid Highways

Distance Maps

1:Start out going SOUTHWEST on 2ND ST toward S LIVERMORE AVE / CR-J2.<0.1 milesMap

</IMG>

2:Turn RIGHT onto S LIVERMORE AVE / CR-J2 W. Continue to follow S LIVERMORE AVE.1.4 milesMap

</IMG>http://mqsigns.aolcdn.com/?s=rs&t=RS...=580&d=WEST&v=3:Merge onto I-580 W via the ramp on the LEFT toward OAKLAND.17.9 milesMap

</IMG>http://mqsigns.aolcdn.com/?s=rs&t=RS...238&d=NORTH&v=4:Take I-238 N toward I-880.1.8 milesMap

</IMG>http://mqsigns.aolcdn.com/?s=rs&t=RS...880&d=SOUTH&v=5:Merge onto I-880 S toward SAN JOSE / SAN MATEO BR.4.0 milesMap

</IMG>http://mqsigns.aolcdn.com/?s=rs&t=RS...n=92&d=WEST&v=6:Merge onto CA-92 W toward SAN MATEO BR (Portions toll).26.1 milesMap

</IMG>http://mqsigns.aolcdn.com/?s=rs&t=RS...n=1&d=SOUTH&v=7:Turn LEFT onto CABRILLO HWY S / CA-1 S.18.3 milesMap

</IMG>

8:End at Bean Hollow State Beach
11000 Cabrillo Hwy, Pescadero, CA 94060, US Map

we will be parked along highway 1 north of the main bean hollow parking lot.

SlinkySam · 03-17-2006, 08:00 AM

Quote:

Originally Posted by blue devil toyota

I'll try to make it. Sam what time are you leaving. I may just follow you.

I want to head out early so I can get a lot of wheeling in. I was thinking of leaving my house at 7am again, but maybe just a little later. What time are you guys leaving?

-Sam

blue devil toyota · 03-17-2006, 08:22 AM

7 sounds good to me. I'll just cruise by your place and try to follow you.

kickback_crawler · 03-17-2006, 06:42 PM

Dude!!! can't make it i going to sactown lots of pics please.

SlinkySam · 03-17-2006, 10:29 PM

Kick_Back - That sucks. I was hoping you could go so we could hear your rig idling while waiting for your turn. We were laughing (and crying) at how your servo lasted the whole time despite being all audibly f'd up.

Bernie - Ok sounds good. I should probably get my rig ready and charged before then eh? See you here.

-Sam

badger · 03-18-2006, 07:53 PM

Sorry guys I am not going crawling tomorrow.

I got the Mog running today and ended up ****ing around with it all day and did not get the things I needed to get done like work on the Scout. So tomorrow I am going to do some work on the Scout and do the rc crawler building I need to do.

I need to be put on restriction from the Mog so I can get some **** done around here.

Have fun, and remember that if you can't make it up an obsticle, if I were there I would be able to.

SlinkySam · 03-18-2006, 09:31 PM

**** the Mog, let's go wheelin.

Quote:

Originally Posted by badger

Have fun, and remember that if you can't make it up an obsticle, if I were there I would be able to.

BWwwwaaaaaahahhahahaha...... oh my god!!! That is great. You kill me man. You sure know how to speak out your *** like no other.

-Sam

badger · 03-18-2006, 09:56 PM

Quote:

Originally Posted by SlinkySam

**** the Mog, let's go wheelin.

BWwwwaaaaaahahhahahaha...... oh my god!!! That is great. You kill me man. You sure know how to speak out your *** like no other.

-Sam

I thought you might like that.

Oh,,, and FYI,,, it's not that hard to speak out your *** like a pro, for just 3 payment's of $29.95, I will send you my "Badger's speak out your *** like you just received a KY enema" instructional DVD.

SlinkySam · 03-18-2006, 10:03 PM

Quote:

Originally Posted by badger

I thought you might like that.

Oh,,, and FYI,,, it's not that hard to speak out your *** like a pro, for just 3 payment's of $29.95, I will send you my "Badger's speak out your *** like you just received a KY enema" instructional DVD.

I bought the video off the Home Shopping Network. I sitll have one more payment left. I also got some Ginsu knives and GLH#9 when I called within 10 minutes of the showing. I have to keep painting my hair so it looks good you know.

Sucks you won't be there. I think you can break away for a short period of time, but if you are afraid of being followed by the Asian driver and getting rear ended, I understand.

-Sam

chino63 · 03-18-2006, 10:15 PM

no worries! the phone books are taped to my a$$ this time! c'mon badger.... every one is going and besides all the cool kids are doing it.

blue devil toyota · 03-19-2006, 09:17 PM

I had fun out there. This place rocks. I think I have finally got my rig set-up, I just have a few things to take care of. I have learned that my front servo hates my drag link. I started with a locknut, lost it, locktighted the next nut lost it, CA glued the next and broke the 4-40 screw. I went and bought another new servo tonight so I can have rear steer again. It held me up a little today having front steer only. See you guys next week.

Bernie

SlinkySam · 03-19-2006, 09:29 PM

Thanks Todd, Bernie, and Chino for a great day of wheeling. The weather sucked again with clear sunny skies.

We just got back from Bean Hollow a little bit ago. Here are the photos:
http://www.nor-calrcrc.com/modules.p...view_album.php

Some of the damage and statistics for the day:
2 rear ring and pinions within 15 minutes of each other (Chino)
1 servo or at least control to it (bernie)
1 axle ear (Chino)
1 rim (bernie)
1 king pin (Chino - but it was found)
Some nut thing on bernie's rig
1 stripped servo arm (Chino)
Something on Todd's rig (I forgot already)
1 Jeep Grill (Sam - almost ripped off)

We burned through I believe battery 14 packs today amongst the 4 of us.

All in all a great day. I can't wait until the comp next weekend.

-Sam

??????????????????????

sicj · 03-19-2006, 09:41 PM

Bernie: it's call rock crawling not rock climbing. How'd the new shocks work out?

that's place looks SICK!! how's the traction out there?

can't wait for the comp!

SlinkySam · 03-19-2006, 09:46 PM

Quote:

Originally Posted by sicj

that's place looks SICK!! how's the traction out there?

Depending on how wet the rocks are and which type of rocks you are on, you can go from slippery go nowhere no matter how much throttle you give snot rocks, to super traction (more than I have seen anywhere else). We have picked an area that is high up and will not be hampered even during high tide. The courses will be very sticky unless it rains some. Then a few spots might get a little slick.

You are right. The place is sick sicj. We spent 9 hours crawling there today and were disappointed that we had to leave so soon. We never really hit the same place twice and we almost made it down to Bean Hollow beach itself which is quite a ways.

-Sam

03-15-2006, 08:43 PM	#1
SlinkySam RCC Addict Join Date: Apr 2004 Location: Santa Clara Posts: 1,456	Bean Hollow Part 2 - 19 Mar 06 Well it was such a great time last weekend that we have to do it all over again, this time without the Mog breaking down. Ok Nor-Cal bruthas, it's time to hit the "near" Bean Hollow local again. For those that didn't catch Dean's detailed directions, we will be heading to a spot just north of Bean Hollow park itself this Sunday the 19th. Now I have to end my day early because I have to help get my wife's studio open for business, so I will get there early. Anyone interested in an early crawl start? I want to leave my house around 7AM again and get in as much time possible. There are just too many lines out there that have Slinky's name on it. If anything, I will catch you guys when you get there. -Sam

03-17-2006, 12:22 AM	#7
chino63 Oppan Gangnam Style Join Date: Jun 2005 Location: Shingle Springs Posts: 5,164	here you go Maneuvers Reverse Route \| Avoid Highways Distance Maps 1:Start out going SOUTHWEST on 2ND ST toward S LIVERMORE AVE / CR-J2.<0.1 milesMap</IMG>2:Turn RIGHT onto S LIVERMORE AVE / CR-J2 W. Continue to follow S LIVERMORE AVE.1.4 milesMap</IMG>http://mqsigns.aolcdn.com/?s=rs&t=RS...=580&d=WEST&v=3:Merge onto I-580 W via the ramp on the LEFT toward OAKLAND.17.9 milesMap</IMG>http://mqsigns.aolcdn.com/?s=rs&t=RS...238&d=NORTH&v=4:Take I-238 N toward I-880.1.8 milesMap</IMG>http://mqsigns.aolcdn.com/?s=rs&t=RS...880&d=SOUTH&v=5:Merge onto I-880 S toward SAN JOSE / SAN MATEO BR.4.0 milesMap</IMG>http://mqsigns.aolcdn.com/?s=rs&t=RS...n=92&d=WEST&v=6:Merge onto CA-92 W toward SAN MATEO BR (Portions toll).26.1 milesMap</IMG>http://mqsigns.aolcdn.com/?s=rs&t=RS...n=1&d=SOUTH&v=7:Turn LEFT onto CABRILLO HWY S / CA-1 S.18.3 milesMap</IMG>8:End at Bean Hollow State Beach 11000 Cabrillo Hwy, Pescadero, CA 94060, US Map we will be parked along highway 1 north of the main bean hollow parking lot. Last edited by chino63; 03-17-2006 at 12:24 AM.

03-15-2006, 09:00 PM	#2
badger Diggin' the new SCX10 II! Join Date: Mar 2004 Location: Norcal Posts: 11,402	I am up in the air on this one. I have a lot of building to do so if I get enough done between now and Sunday they hopefully. I will drive the Honda out so I can jam there and back in a hurry if I can't spend the whole day.

03-15-2006, 09:38 PM	#3
kickback_crawler Pebble Pounder Join Date: Sep 2004 Location: Sideways on a 3/8 mile on clay Posts: 181	i can make it just let me know the time you are going to be there and im there DuDe!!!!

03-16-2006, 11:31 AM	#4
blue devil toyota Quarry Creeper Join Date: Jul 2005 Location: Santa Clara Posts: 273	I'll try to make it. Sam what time are you leaving. I may just follow you.

03-16-2006, 09:47 PM	#5
Over-Rev Pebble Pounder Join Date: Aug 2005 Location: Vallejo Posts: 178	I dunno if Ill be able to make it,Waiting on SW2 chassis and shock's

03-16-2006, 10:55 PM	#6
51504rock Rock Crawler Join Date: Nov 2005 Location: Livermore Posts: 579	i will try and make it but how do you get there?

03-17-2006, 08:22 AM	#9
blue devil toyota Quarry Creeper Join Date: Jul 2005 Location: Santa Clara Posts: 273	7 sounds good to me. I'll just cruise by your place and try to follow you.

03-17-2006, 06:42 PM	#10
kickback_crawler Pebble Pounder Join Date: Sep 2004 Location: Sideways on a 3/8 mile on clay Posts: 181	Dude!!! can't make it i going to sactown lots of pics please.

03-17-2006, 10:29 PM	#11
SlinkySam RCC Addict Join Date: Apr 2004 Location: Santa Clara Posts: 1,456	Kick_Back - That sucks. I was hoping you could go so we could hear your rig idling while waiting for your turn. We were laughing (and crying) at how your servo lasted the whole time despite being all audibly f'd up. Bernie - Ok sounds good. I should probably get my rig ready and charged before then eh? See you here. -Sam

03-18-2006, 07:53 PM	#12
badger Diggin' the new SCX10 II! Join Date: Mar 2004 Location: Norcal Posts: 11,402	Sorry guys I am not going crawling tomorrow. I got the Mog running today and ended up **ing around with it all day and did not get the things I needed to get done like work on the Scout. So tomorrow I am going to do some work on the Scout and do the rc crawler building I need to do. I need to be put on restriction from the Mog so I can get some ** done around here. Have fun, and remember that if you can't make it up an obsticle, if I were there I would be able to.

03-18-2006, 10:15 PM	#16
chino63 Oppan Gangnam Style Join Date: Jun 2005 Location: Shingle Springs Posts: 5,164	no worries! the phone books are taped to my a$$ this time! c'mon badger.... every one is going and besides all the cool kids are doing it.

Sponsored Links

03-19-2006, 09:17 PM	#17
blue devil toyota Quarry Creeper Join Date: Jul 2005 Location: Santa Clara Posts: 273	I had fun out there. This place rocks. I think I have finally got my rig set-up, I just have a few things to take care of. I have learned that my front servo hates my drag link. I started with a locknut, lost it, locktighted the next nut lost it, CA glued the next and broke the 4-40 screw. I went and bought another new servo tonight so I can have rear steer again. It held me up a little today having front steer only. See you guys next week. Bernie

03-19-2006, 09:29 PM	#18
SlinkySam RCC Addict Join Date: Apr 2004 Location: Santa Clara Posts: 1,456	Thanks Todd, Bernie, and Chino for a great day of wheeling. The weather sucked again with clear sunny skies. We just got back from Bean Hollow a little bit ago. Here are the photos: http://www.nor-calrcrc.com/modules.p...view_album.php Some of the damage and statistics for the day: 2 rear ring and pinions within 15 minutes of each other (Chino) 1 servo or at least control to it (bernie) 1 axle ear (Chino) 1 rim (bernie) 1 king pin (Chino - but it was found) Some nut thing on bernie's rig 1 stripped servo arm (Chino) Something on Todd's rig (I forgot already) 1 Jeep Grill (Sam - almost ripped off) We burned through I believe battery 14 packs today amongst the 4 of us. All in all a great day. I can't wait until the comp next weekend. -Sam ??????????????????????

03-19-2006, 09:41 PM	#19
sicj Quarry Creeper Join Date: Dec 2004 Posts: 427	Bernie: it's call rock crawling not rock climbing. How'd the new shocks work out? that's place looks SICK!! how's the traction out there? can't wait for the comp!

RCCrawler Forums

Thread: Bean Hollow Part 2 - 19 Mar 06