GCM 4TEN Leaf-Spring Scale Truck Chassis

[thurayt]

What is the width between the frame rails at the transmission/motor mount, I am curious if the RC4WD R2 tranny would bolt in place.

[scrounge]

Nice looking chassis

Decisions......Decisions....

[Generis]

Originally Posted by thurayt

What is the width between the frame rails at the transmission/motor mount, I am curious if the RC4WD R2 tranny would bolt in place.

Between the rails IN the c-channel is 2.931 inches 74.4mm

Thanks for the comments

[thurayt]

I received my chassis yesterday and it looks great. The RC4WD R2 tranny won't fit unless the inside of the shock towers have some material removed.

[kgb424]

I got a questions for Generis

I got 2 questions for you

about the 21'' 4 Ten Chassis

1. what is the wheel base of the 21'' chassis

I have a 1:6 Scale Humvee body that is 21 3/4 long

and need a chassis that I can get a 16 1/4'' wheel base out of, cause 16 1/4'' is center of the front and rear wheel wells

2. do they make Axial AR60 or the Wraith axles leaf spring mounts

or is it possible to have a set of 4 made

I want to use the Wraith axles cause the Humvee body is 10 1/4 '' wide

and the Wraith axles with 2.2'' wheels and tires and with .475 SLW hubs are the perfect width for the Humvee body

I would really like to know the wheel base of the 21'' 4 Ten chassis

thank you

[Generis]

Hello,
This item has been discontinued and replaced with our new CMAX chassis, available early in 2016. Check this link here: >>CMAX CHASSIS LINK<<
The rail is 19 inches long on the new chassis.
Thanks

[kgb424]

that does not answer any of my questions

I'm looking for chassis with a 16 1/4'' wheel base

and you telling me you got a new chassis with even less information

then the 21'' 4 ten chassis

Is not helping me at all

and why would a wait for new chassis that you can not even

show pictures of yet, and there is no wheel base information

Just like there is no information on the 21" 4 Ten chassis

That's why I asked you in the first place

So again how does this help me

If you can't answer the questions

then just say so

not refer me to a product that is not even available

with no information at all

[donny8594]

It's adjustable wheelbase asshole.

[bigchimp]

Originally Posted by Generis

Hello,
This item has been discontinued and replaced with our new CMAX chassis, available early in 2016. Check this link here: >>CMAX CHASSIS LINK<<
The rail is 19 inches long on the new chassis.
Thanks

Hi, I have a question.

So the width between leaf mounts on the RC4WD D35 & K44 Axles are about 80mm or roughly 3.1" apart....would I be able to use these axles on the CMAX chassis without mounting the brackets on the outside of the chassis?

Am I stuck using an RC4WD chassis for these axles or fabbing my own to get a setup where I can just use the brackets mounted normally rather than on the outside of the rails?

Thanks

[Generis]

Our CMAX chassis uses RC4wd axles and our outside-the-rail leaf mounts. It works great, and we have tons of setup and wheelbase adjustments. There's no under-frame option for leaf mounting. The frame width on our CMAX is likely the most narrow of any of the options, and it's compatible with a ton of axle options and body setups, along with having a full scale driveline under the truck. I have seen a TON of trucks with leaf mounts outside the rails in the 1:1 size.

[Loehdingc]

I need this truck already. I missed out on a single=liink coil=over suspension custom Unimog on a sale thread and haven't the place to fabricate anything without ruining my rentals carpet, so buying is my only option, albeit the best one.

[Generis]

Hi, We will release a brand new chassis and suspension and axle setup in only a few weeks now, and your Mog will have a perfect home to live on! The 4TEN as you know it in this thread has been discontinued.

[RootBreaker]

Originally Posted by Generis

Hi, We will release a brand new chassis and suspension and axle setup in only a few weeks now, and your Mog will have a perfect home to live on! The 4TEN as you know it in this thread has been discontinued.

I'm late to the game but many googling searches lead me back to the beloved rccrawler

anyway..where do you stand as I am looking at making a 1:1 of my 78 chevy fullsize and looking for a leaf sprung frame...

[svt923]

Originally Posted by RootBreaker

anyway..where do you stand as I am looking at making a 1:1 of my 78 chevy fullsize and looking for a leaf sprung frame...

The Cmax is the new chassis, check it out.

GCM Webstore Canada International - CMAX Ultimate Leaf Spring Kit

[Generis]

Yes sir, we have just the thing. Besides the CMAX leaf spring combo here GCM - CMAX Chassis LINK we also have a bunch of chevys shown off in our CMAX scale talk video here: