JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry Introducing... SCX10 Rear Upper Link Risers (AKA RULR) These parts will allow you to raise up the chassis side rear upper link mounting points to give you better anti-squat characteristics (see below for a tech answer on why this is good...) <hr> http://i1335.photobucket.com/albums/...pse493417c.jpg http://i1335.photobucket.com/albums/...ps754331eb.jpg Nylon SCX10 RULR (V2) These parts are made from durable Nylon 645, and will come dyed black. On request I can leave them natural white so you can dye them any color you want.
<hr> http://i1335.photobucket.com/albums/...psc2a8a3fc.jpg Extended Version Now Available! SCX10 Rear Upper Link Risers (AKA RULR)
<hr> Disclaimer - "There is still some controversy about the whole squat or anti-squat thing, so the below information is based on what I was able to find. In the end, these improve the performance of the SCX because of the better vertical link mount separation at the chassis. Many users are reporting 2 degrees steeper climbs." Here's some more info on why this is a good thing for your rig: With the raised COG and often vertical climbs these rigs encounter, the stock squat set-up actually makes it easier for the front suspension to unload and allow the vehicle to flip over backward. By simply changing the mounting point, this turns the geometry to an anti-squat set-up and when under power, the rotation of the axle actually raises the back end of the vehicle, providing a forward bias, helping you get up and over that steep climb. Squat vs. Anti-squat: http://img.photobucket.com/albums/v2...ps0a613ac3.jpg http://img.photobucket.com/albums/v2...ps28ef9e7f.jpg More info in many threads on RCC, but here's one recent one or two that I liked: http://www.rccrawler.com/forum/gener...k-dummies.html http://www.rccrawler.com/forum/1-9-s...ml#post4396724 |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry To purchase, simply visit my website: JC Auto Design <hr> http://i1335.photobucket.com/albums/...psad5e2f0d.png RULR V2 - Nylon (Dyed Black Plastic) - $10 per pair http://i1335.photobucket.com/albums/...psc2a8a3fc.jpg Extended RULR - Nylon (Dyed Black Plastic) - $10 per pair <hr> USPS First Class Mail Shipping is included in the above price. International shipping is available, but please send me a PM for a shipping quote. Thanks for your support! |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry Installation Instructions: Steel version: http://i1335.photobucket.com/albums/...psd1ee3245.jpg Step 1: Remove the screw and lock nut holding the lower link on the chassis. <hr> http://i1335.photobucket.com/albums/...psa6be799d.jpg Step 2: Temporarily mount the RULR to the outside of the chassis, ensuring that the bottom edge is flush with the bottom of the chassis. <hr> http://i1335.photobucket.com/albums/...ps8c639385.jpg Step 3: Using the RULR as a template, drill a 1/8" (3mm) hole into the chassis rail. <hr> http://i1335.photobucket.com/albums/...ps1b431b93.jpg Step 4: Remove the RULR <hr> Step 5: At this point, there are a few options to how you would mount the RULR. This will depend on your set-up. http://i1335.photobucket.com/albums/...psac7e71ab.jpg Option 1: Inside of chassis, with spacers http://i1335.photobucket.com/albums/...ps0a66d20a.jpg In this image, a 1/4" (6mm) spacer was used to get the RULR as close to the driveshaft without binding. For this set up, you will likely need different rod ends (angled) to mount the link to the outside of the RULR. ----------------------------------- http://i1335.photobucket.com/albums/...ps92f62c23.jpg Option 2: Outside of chassis, spacer for upper link For this set-up, you can adjust the spacer to get the link where you would like it. This set up typically does not work if you have sliders mounted to the chassis. ----------------------------------- http://i1335.photobucket.com/albums/...ps646f5e60.jpg http://i1335.photobucket.com/albums/...psba8946ea.jpg Option 3: Inside of chassis, no spacers, 30 degree bend For this set up, you would bend the RULR about 30 degrees as shown below: http://i1335.photobucket.com/albums/...psc11d38ba.jpg This can be done fairly easily if you clamp one end in a vice and use either strong pliers or a wood block and a hammer. <hr> Step 6: Repeat for the other side, and go wheeling! <hr> Plastic Version For the plastic version, simply remove the link mount screw, install the RULR on the appropriate side (these are Left / Right dependent), and install the upper link. |
Yes sir. Mounts look great, let alone the improved suspension geometry features. ... |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry Quote:
Pricing added above for those wanting to purchase these. |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry 2sets paid for "thumbsup" |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry Quote:
|
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry Very nice, I have wanted to do this for a while now but have been to lazy to strip the chassis and weld her up.. PP sent"thumbsup" |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry paid for this and a rear truss both in blue cant wait! |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry Quote:
Quote:
Thanks for your support! |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry paid for this and a rear truss also |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry All orders paid for by right now are going in the mail today. Paypal transactions updated with appropriate tracking info. Thanks for your orders, keep them coming! |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry Paypal Sent for 2 Sets ! Thanks |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry This is awesome!!! Pay Pal sent for a set of your SCX10 Rear Upper Link Risers .."thumbsup""thumbsup" |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry Just ordered 2 sets, thanks |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry 2 sets ordered.."thumbsup" |
Looks great! |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry Dang! You beat me to it. :ror: Looks good though, nice job. "thumbsup" |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry Quote:
Sorry... the early bird gets the... something... I didn't even know anyone else was working on something like this. Ever since doublej's thread I have been planning this out, just had to wait for the vendor star to release it. Thanks for the compliment, and thanks to those with new orders. I am getting those printed tonight and will have them out very soon. |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry Quote:
|
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry For people that are wondering about how the blue looks. Here it is! http://i869.photobucket.com/albums/a...ps4eaa63db.jpg |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry That looks pretty cool. I just ordered the rear risers for my scx10. |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry Great looking product. Ordered a set. |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry Thanks for the orders guys! These are becoming more popular than I thought they would be, but I am glad to provide a product like this. Please feel free to post a pic once you guys get these installed and don't be shy on comments about performance gains (or suggestions for changes, fitment issues, etc.) |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry Just placed an order. Thrilled to se a unique functional item like this offered. Keep it up! |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry Nice! I was talking about something like this the other day with a buddy. Definitely going to get a bunch of them for the shop "thumbsup" |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry Quote:
Quote:
|
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry I am in for one set..thanks |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry Payment sent thanks for such an awesome product |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry Really excited to get mine in and test them out! |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry Payment sent for link risers,sweet product."thumbsup" |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry In for one set to start with. |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry got mine today! cant wait to instal and shoot some pics! more to come! |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Thanks! |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry Anyone else get their risers? Initial impressions? Installed Pics? Don't be afraid to post up. |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry Just Ordered two sets. I'll post pics when I get mine. |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry Got mine the other day, I'm in the middle of a full tear down so no pics up yet, but I can say these are great little pieces! Just mocking up the fit is outstanding, an these should be a great addition to the rig . I will have pictures and a quick little review in my build thread within the next day or 2. Thanks again bud"thumbsup" I can't wait to put these through the ringer with the pro4 and 4s:twisted: |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry Mine showed up yesterday, should have a chance to get them installed this weekend. I will post a few pics when I do. |
Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry Glad to hear it! All other orders are out the door, so you guys should see them arrive after the weekend. Keep the info flowing and let's see some pics! I've got a G6 JK to build, and it's getting the JCAD treatment, RULRs, Trusses, CMS, the works... Pics will follow once I get the thing built. |
All times are GMT -6. The time now is 10:02 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com