RCCrawler Forums

Plays_with_Toys · 01-01-2005, 03:44 PM

I can't really get to posting the pics until later, and my video will be even later than that since I am going to dinner soon, but for those with pictures, post them up.

I had blast! I found out what was wrong with my truck. The on/off switch to the esc was partially ripped off, so I guess I will just sauder the two wires together and call it done.

SR5Dave · 01-01-2005, 04:08 PM

Quote:

Originally Posted by Plays_with_Toys

The on/off switch to the esc was partially ripped off, so I guess I will just sauder the two wires together and call it done.

I'll say it again.. POWER SWITCHES SUCK!!!!

sambmx · 01-01-2005, 06:10 PM

Yea they do why would they even design it into an esc? Unpulging a battery is to complicated?

Plays_with_Toys · 01-01-2005, 06:48 PM

Well, we had a small course setup, two different ones actually, and I pointed out on the first obstacle (the wall) but I got up the bonus line so even with a rollover onto a marker, I was at 12 points when my truck just died on the rocks. I was going to start it over when everyone had shuffled through and didn't figure out what was wrong with the truck until I got home and the switch plain fell off.

Here are the only pics I have, all posers, but I have some pretty good video. I'll make two versions, one high res, and one for 56k'ers.

Ok....... and the other pics won't load!

I'll try and get them.

SR5Dave · 01-01-2005, 08:20 PM

Can we get some names to go with the faces? ;)

jason · 01-01-2005, 08:32 PM

1st pic the guy on left is 4wheelin4me, the kid with no hands belongs to Dirk, I felt sorry for him, can you imagine going throuh life with no hands

Next pic, on left is Bender, on right is Ace. Yeah thats right the same Ace that was bragging in the chop threads that we didn't have a pic of him, hint, hint.

jason · 01-01-2005, 08:34 PM

BTW, rig stacking is gay!

PinchFlat · 01-01-2005, 08:45 PM

Quote:

Originally Posted by jason

BTW, rig stacking is gay!

Yes... Yes it is.

We got 4" of snow...

I wish I could crawl and try out MY new Moabs.

Plays_with_Toys · 01-01-2005, 08:46 PM

No... no pics... But I do have video of it!

Video is coming as soon as they are uploaded to rcpics. It is pretty sweet, by far my best video yet. I will have hi_res and lo_res.

jason · 01-01-2005, 09:08 PM

Let me say this, 40 series Moabs are the new tire to have!

Here is Slyther upside down, which is usually how Dirk spends most of his time

This is my favorite pic of the day. Also Slyther.

jason · 01-01-2005, 09:11 PM

Ace's rig, Bastard in the background.

Pwt's TLT

A rig Griz built, don't remember his name?

?

jason · 01-01-2005, 09:12 PM

4wheelin4me's txt

More rig stacking

jason · 01-01-2005, 09:25 PM

yes, but remember you must buy new wheels for these as well.

Here are some specs

Search fawking newbie

http://www.rccrawler.com/postlite5039-moab.html

SR5Dave · 01-01-2005, 09:40 PM

Quote:

Originally Posted by slbks5

Got it... Not new, just lazy today.... some people have to work weekends!!

Thanks

Now the Question---- Best wheels for the moab's

Jason is one of them

damn newbs

jason · 01-01-2005, 09:45 PM

Quote:

Originally Posted by slbks5

Got it... Not new, just lazy today.... some people have to work weekends!!

Don't even start with me, I've been up since 5pm yesterday, work lastnight, crawled all day, now back at work

Plays_with_Toys · 01-01-2005, 09:54 PM

Ok.... videos! (about freaking time! took me an hour to upload, on a cable modem!!!)

Here's the lo res(5mb) http://www.rcpics.net/view_single.php?medid=45989

Here's the high res (10mb) http://www.rcpics.net/view_single.php?medid=45990

BENDER · 01-01-2005, 10:08 PM

Can't see video, just a bunch of code.

jason · 01-01-2005, 10:09 PM

Hey PWT will you email me the highres version, I've never been able to view vids on rcpics

Plays_with_Toys · 01-01-2005, 10:12 PM

Gyahhhh, I don't know whats up with the code thing, I got that with my last video, but it plays fine for me.

Jason, I'll zip you the video, maybe you can host it?

EDIT: Oh and let me know what you guys think. I'm trying to get better with making these videos. I always try to match a song to the personality of the clips, and I am trying to make them more interesting with transitions and variety. I thought I did a pretty decent job considering its only my 4th video, but I want to hear comments/critiques.

rckjeep · 01-01-2005, 10:23 PM

Alright Digs. I see those are my rings you got there. NOW PAY UP!

Looks good too.

01-01-2005, 03:44 PM	#1
Plays_with_Toys I wanna be Dave Join Date: Jun 2004 Location: Centennial, CO Posts: 2,129	RCCrawler Raffle pictures and video thread I can't really get to posting the pics until later, and my video will be even later than that since I am going to dinner soon, but for those with pictures, post them up. I had blast! I found out what was wrong with my truck. The on/off switch to the esc was partially ripped off, so I guess I will just sauder the two wires together and call it done.

01-01-2005, 06:10 PM	#3
sambmx Pebble Pounder Join Date: Aug 2004 Location: orange county n.y. , building the hydro crawler Posts: 195	Re: RCCrawler Raffle pictures and video thread Yea they do why would they even design it into an esc? Unpulging a battery is to complicated?

01-01-2005, 06:48 PM	#4
Plays_with_Toys I wanna be Dave Join Date: Jun 2004 Location: Centennial, CO Posts: 2,129	Re: RCCrawler Raffle pictures and video thread Well, we had a small course setup, two different ones actually, and I pointed out on the first obstacle (the wall) but I got up the bonus line so even with a rollover onto a marker, I was at 12 points when my truck just died on the rocks. I was going to start it over when everyone had shuffled through and didn't figure out what was wrong with the truck until I got home and the switch plain fell off. Here are the only pics I have, all posers, but I have some pretty good video. I'll make two versions, one high res, and one for 56k'ers. Ok....... and the other pics won't load! I'll try and get them.

01-01-2005, 08:20 PM	#5
SR5Dave I wanna be Dave Join Date: Jan 2004 Location: Flagstaff, AZ Posts: 2,399	Re: RCCrawler Raffle pictures and video thread Can we get some names to go with the faces? ;)

01-01-2005, 08:32 PM	#6
jason R.I.P. Chip Join Date: Jan 2004 Location: The Crawler State Posts: 13,938	Re: RCCrawler Raffle pictures and video thread 1st pic the guy on left is 4wheelin4me, the kid with no hands belongs to Dirk, I felt sorry for him, can you imagine going throuh life with no hands Next pic, on left is Bender, on right is Ace. Yeah thats right the same Ace that was bragging in the chop threads that we didn't have a pic of him, hint, hint.

01-01-2005, 08:34 PM	#7
jason R.I.P. Chip Join Date: Jan 2004 Location: The Crawler State Posts: 13,938	Re: RCCrawler Raffle pictures and video thread BTW, rig stacking is gay!

01-01-2005, 08:46 PM	#9
Plays_with_Toys I wanna be Dave Join Date: Jun 2004 Location: Centennial, CO Posts: 2,129	Re: RCCrawler Raffle pictures and video thread No... no pics... But I do have video of it! Video is coming as soon as they are uploaded to rcpics. It is pretty sweet, by far my best video yet. I will have hi_res and lo_res.

01-01-2005, 09:08 PM	#10
jason R.I.P. Chip Join Date: Jan 2004 Location: The Crawler State Posts: 13,938	Re: RCCrawler Raffle pictures and video thread Let me say this, 40 series Moabs are the new tire to have! Here is Slyther upside down, which is usually how Dirk spends most of his time This is my favorite pic of the day. Also Slyther.

01-01-2005, 09:11 PM	#11
jason R.I.P. Chip Join Date: Jan 2004 Location: The Crawler State Posts: 13,938	Re: RCCrawler Raffle pictures and video thread Ace's rig, Bastard in the background. Pwt's TLT A rig Griz built, don't remember his name? ?

01-01-2005, 09:12 PM	#12
jason R.I.P. Chip Join Date: Jan 2004 Location: The Crawler State Posts: 13,938	Re: RCCrawler Raffle pictures and video thread 4wheelin4me's txt More rig stacking

01-01-2005, 09:25 PM	#13
jason R.I.P. Chip Join Date: Jan 2004 Location: The Crawler State Posts: 13,938	Re: RCCrawler Raffle pictures and video thread yes, but remember you must buy new wheels for these as well. Here are some specs Search fawking newbie http://www.rccrawler.com/postlite5039-moab.html

01-01-2005, 09:54 PM	#16
Plays_with_Toys I wanna be Dave Join Date: Jun 2004 Location: Centennial, CO Posts: 2,129	Re: RCCrawler Raffle pictures and video thread Ok.... videos! (about freaking time! took me an hour to upload, on a cable modem!!!) Here's the lo res(5mb) http://www.rcpics.net/view_single.php?medid=45989 Here's the high res (10mb) http://www.rcpics.net/view_single.php?medid=45990

01-01-2005, 10:08 PM	#17
BENDER 2006 2.2 National Champ Join Date: Dec 2004 Location: Big Bear Lake Posts: 8,328	Re: RCCrawler Raffle pictures and video thread Can't see video, just a bunch of code.

01-01-2005, 10:09 PM	#18
jason R.I.P. Chip Join Date: Jan 2004 Location: The Crawler State Posts: 13,938	Re: RCCrawler Raffle pictures and video thread Hey PWT will you email me the highres version, I've never been able to view vids on rcpics

01-01-2005, 10:12 PM	#19
Plays_with_Toys I wanna be Dave Join Date: Jun 2004 Location: Centennial, CO Posts: 2,129	Re: RCCrawler Raffle pictures and video thread Gyahhhh, I don't know whats up with the code thing, I got that with my last video, but it plays fine for me. Jason, I'll zip you the video, maybe you can host it? EDIT: Oh and let me know what you guys think. I'm trying to get better with making these videos. I always try to match a song to the personality of the clips, and I am trying to make them more interesting with transitions and variety. I thought I did a pretty decent job considering its only my 4th video, but I want to hear comments/critiques.

Sponsored Links

01-01-2005, 10:23 PM	#20
rckjeep I wanna be Dave Join Date: Jun 2004 Location: San Jose Posts: 5,207	Re: RCCrawler Raffle pictures and video thread Alright Digs. I see those are my rings you got there. NOW PAY UP! Looks good too.

RCCrawler Forums

Thread: RCCrawler Raffle pictures and video thread