another battery charging question

[sierradmax]

I have 2 1500 NIMH 8 cell split packs from ckrc

http://www.ckrccrawlers.com/shop/ind...roducts_id=691

The charger I have is a duratrax Piranha digital peak charger

http://www.duratrax.com/caraccys/dtxp4005.html

1) So setting battery type is easy : NiMH
2) Battery capacity is : 1500

3) what should I use as a charge current?
4) What peak sensitivity setting should I use (mV/C)? Should I go according to this chart?

MAH Amp
100... 0.1
200... 0.2
300... 0.3
400... 0.4
500... 0.5
600... 0.6
700... 0.7
800... 0.8
900... 0.9
1000... 1.0
1100... 1.1
1200... 1.2
1300... 1.3
1400... 1.4
1500... 1.5
1600... 1.6
1700... 1.7
1800... 1.8
1900... 1.9
2000... 2.0
2100... 2.1
2200... 2.2
2300... 2.3
2400... 2.4
2500... 2.5
2600... 2.6
2700... 2.7
2800... 2.8
2900... 2.9
3000... 3.0
3100... 3.1
3200... 3.2
3300... 3.3
3400... 3.4
3500... 3.5
3600... 3.6
3700... 3.7
3800... 3.8
3900... 3.9
4000... 4.0
4100... 4.1
4200... 4.2
4300... 4.3
4400... 4.4
4500... 4.5
4600... 4.6
4700... 4.7
4800... 4.8
4900... 4.9
5000... 5.0

[floogldood]

rate can be between .1 - 2 amps. MV should be set between 3-5.