| |
09-01-2008, 01:59 PM
| #1 |
| RCC Addict  Join Date: Feb 2008 Location: Nevada
Posts: 1,267
|  ESC problem Novak
going to Lipo my set up Axial Scorpion ESC Novak Rooster 12T #1841 crawler edition reciever Airtronics super micro 92836 3ch (MX-3) new Lipo Battery / 2 cell / 2150mah / VP racing battery I'm trying to change my ESC to profile #3, for lipo 1. I disconnected esc from airtronics receiver 2. lipo connected to esc 3. turn on esc (red solid light on) 4. push button hold both lights flash (let go) 5. push button quick once, it flashes once (both red and green) 6. push again once, it flashes twice (both red and green) 7.this is the problem, I push it again one quick for #3, it flashes once I push it again it flashes twice....like it doesn't have profile 3 or 4 I tryed it a few times but same thing??? I figured I would try here before calling the company, not like they will be open today anyhow being Holiday  thanks for any help, Dewayne |
|  |
| Sponsored Links | |
| | |
|
09-01-2008, 02:37 PM
| #2 |
| Newbie Join Date: Jul 2008 Location: Kent
Posts: 22
|
The crawler edition only has "2" profiles. Read the addendum that came with your ESC, it tells you how to do it. If you can't find the addendum, just set it with instructions you have for profile "2" and you're there.
|
|
| |
|
09-01-2008, 05:38 PM
| #3 |
| RCC Addict Join Date: Feb 2008 Location: Nevada
Posts: 1,267
|
Admitting you don't read instructions on the best web site for Crawlers ever With wife laughing in the background hysterically because you don't need instructions and reading directions seeing i needed caps for motor...priceless someone put a bag of caps in the bag without me knowing and the same someone must have put in an addendum too  thank you cyclone-charlie |
|
| |
 |
| |
Linear Mode
