| |
02-03-2009, 10:24 AM
| #1 |
| I wanna be Dave Join Date: Oct 2006 Location: Centered
Posts: 2,082
|  Dead Tekin FX-R?
I have a Tekin FX-R installed in my MRC Nat that I robbed from last years 2.2 rig, in which it ran well until the last day that I took it out. On that day it simply stopped functioning, and when I picked it up and set it back down, all was good. After having to do that 3 or 4 times, I knew something was up. Fast forward to today...It's set it up in my Nat and it ran well for the first 2 runs, but now I have no input control or movement at all. Plugged into my Hot Wire and I downloaded the latest software updates and re-adjusted all of my profiles on the ESC, then re-calibrated to my DX3. Now when I fire it up, I have no audibles, and still no function at all, but the LED's are still working and moving as they would normally. Here's what I'm using with the FX-R: Hi Tec 5245MG Mini Digital Spektrum SR3500 Micro Rx Losi 2S 600 mAH Lipo Holmes Torque Master Mini Micro Deans and 18 awg wire Thoughts anyone?  Last edited by CreepyCrawl; 02-03-2009 at 10:29 AM. |
|  |
| Sponsored Links | |
| | |
|
02-03-2009, 02:34 PM
| #2 |
| I wanna be Dave Join Date: Oct 2006 Location: Centered
Posts: 2,082
|
On it's way to Tekin. Tech rep got back to me and thinks it's the Drive FETs |
|
| |
|
02-03-2009, 05:20 PM
| #3 |
| Moderator   Join Date: Jul 2007 Location: Texas baby!
Posts: 1,498
|
That's the first I have heard of an FX-R failing. Hope Tekin gets you fixed up. Out of curiosity, what motor and battery were you running in the 2.2?
|
|
| |
 |
| |
Linear Mode
