|
| LinkBack | Thread Tools | Display Modes |
06-17-2009, 09:58 PM | #1 |
Newbie Join Date: Jun 2009 Location: Morgantown
Posts: 4
| 4WS XTM X-Crawler - Please verify my dual ESC + BEC wiring
Ive been scouring these forums for hours and have seen many good examples. Ive thrown together an image of the items that I will be using and want to make sure Im wiring it up correctly. Dont wanna let the smoke out of the box Also, do you think Im going overboard on the Deans connectors? I can just solder the Y-Connectors but I thought the Deans would be nice. Im basically using the BEC to provide a solid 6.0v to the two servos and letting the two ESCs send power to the receiver. Should I cut one of the power cables and only provide power from 1 ESC or is it alright to leave both? Also, is there any need to ground the servos or BEC to the receiver? Thanks in advance! Great site! Cant wait to finish my first crawler. http://img30.imageshack.us/img30/4812/wiring.png Last edited by HairNutz; 06-17-2009 at 10:03 PM. |
Sponsored Links | |
06-18-2009, 12:13 AM | #2 |
Quarry Creeper Join Date: Jan 2008 Location: Cyprus
Posts: 321
|
Take the red wire out of the plug of one of the ESCs. Otherwise that looks perfect to me. Oh and welcome to RCC! Last edited by Karadjas; 06-18-2009 at 12:15 AM. |
| |