| |
07-19-2009, 09:22 PM
| #1 |
| Pebble Pounder Join Date: Oct 2008 Location: KY
Posts: 126
|  M8 Three pos. switch? hey guys i have a M8 transmiter, the third chanel is controled with a knob is there anyone who has went into the m8 and put a Three pos. switch into them let me know if anyone has |
|  |
| Sponsored Links | |
| | |
|
07-20-2009, 01:39 AM
| #2 |
| Rock Crawler Join Date: Feb 2008 Location: UK
Posts: 826
| i don't know that Tx, but if the third channel is proportional, controlled by a pot, you can convert it the same as with a stick radio. There have been several threads here about converting the DX6i. Basically, you need to buy a 3-position switch (on-off-on) and 3 resistors (2x 2K2R, 1x 220R) and solder these parts in place of the pot. |
|
| |
 |
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
