RCCrawler Forums

Badd · 07-27-2009, 09:39 PM

I had some guys ask me about how my setup was wired . I know there is otherways ,but this is how I did mine . I powered the winch , servo & receiver off of 1 Castle BEC set at 6 volts because I only running a Hitec 645 sevro .Here is a drawing to help .

constantmotion · 07-28-2009, 05:31 AM

Yep, that is how mine is wired up. I upped my BEC to 7.2V before this weekend just to see if my 645 would hold up and give my winch a little more speed and umph. It held up fine. It may not last long, though.

07-27-2009, 09:39 PM	#1
Badd I wanna be Dave Join Date: Sep 2005 Location: Dirty South Posts: 4,064	powering a 3 racing winch , servo & receiver I had some guys ask me about how my setup was wired . I know there is otherways ,but this is how I did mine . I powered the winch , servo & receiver off of 1 Castle BEC set at 6 volts because I only running a Hitec 645 sevro .Here is a drawing to help . Last edited by Badd; 07-27-2009 at 09:41 PM.

07-28-2009, 05:31 AM	#2
constantmotion On the lookout for Rocks Join Date: Mar 2006 Location: Monroe, Louisiana Posts: 3,711	Yep, that is how mine is wired up. I upped my BEC to 7.2V before this weekend just to see if my 645 would hold up and give my winch a little more speed and umph. It held up fine. It may not last long, though.

Sponsored Links

RCCrawler Forums

Thread: powering a 3 racing winch , servo & receiver