| |
| |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
09-25-2009, 12:31 PM
| #1 |
| Rock Crawler  Join Date: Jul 2007 Location: E LEE, NV
Posts: 589
|  help with my 3rd channel
i have an m8 that i put a three position switch on it and when i installed it i left the stock knob still intact so i could use it to center the servo but that knob wore out and started glitching super bad so i removed it now my servo only goes full left and full right (only has two pos instead of three) what do i need to get to fix that? (size pots or similar) please help me  |
|  |
| Sponsored Links | |
| | |
|
09-25-2009, 02:28 PM
| #2 |
| Rock Crawler Join Date: Jul 2007 Location: E LEE, NV
Posts: 589
|
i fixed it i took apart a tq3 i had and used the one that was on that third channel thanks anyways  |
|
| |
|
| |
Linear Mode
