| |
| |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
01-04-2006, 12:03 AM
| #1 |
| Rock Crawler Join Date: Nov 2005 Location: Fremont/Newark, California
Posts: 710
|  Digital servo makin noise.
So I went down and dropped the coin on the HItec 5955 digital titanium servo with 333oz of torque.....its makin some funny noise all the time...hard to explain but sounds kinda like a glitching sound ( if its even a sound) ..Do digital servos usually do this?? Thing works awesome just wondering about the noise. thanks
|
|  |
| Sponsored Links | |
| | |
|
01-04-2006, 04:28 AM
| #2 |
| Rock Crawler Join Date: Dec 2004 Location: Land of the Free, because of the Brave
Posts: 891
| If it's like a high-pitched whine, then it's normal. These servos are always trying to return to center (even if the wheels are off the ground with no load). Or at least mine and a few others always do that. -WRM |
|
| |
|
01-04-2006, 05:29 AM
| #3 |
| Rock Stacker Join Date: May 2004 Location: Indiana
Posts: 95
|
Yea i have a Jr 8550 digital and it does the same thing. Its just the way the digital internals are set up. Like WR said its always trying to return to center and stay there so the almost hum a little bit.
|
|
| |
|
01-04-2006, 07:12 AM
| #4 |
| I wanna be Dave  Join Date: Apr 2005 Location: Vegas
Posts: 7,172
|
Its normal.
|
|
| |
|
01-04-2006, 01:00 PM
| #5 |
| Rock Crawler Join Date: Nov 2005 Location: Fremont/Newark, California
Posts: 710
|
ok thanks guys
|
|
| |
|
| |
Linear Mode
