| |
| |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
05-03-2010, 06:26 PM
| #1 |
| Newbie Join Date: Dec 2009 Location: At home
Posts: 12
|  traxxas tq 2.4ghz 4 channel
I have done some searching but I am still not sure about this. Will this radio work on my moa with a punk dig?
|
|  |
| Sponsored Links | |
| | |
|
05-03-2010, 06:35 PM
| #2 |
| Pebble Pounder Join Date: Feb 2009 Location: LeMars, Iowa
Posts: 158
|
If your looking at the model 2230 tq4 2.4, and plan on using the 4th channel for the punk unit, then yes...it will work right out of the box. If you want to use the 3rd channel, then you'll have to do a tq3 mod to it. |
|
| |
|
05-03-2010, 07:09 PM
| #3 |
| Newbie Join Date: Dec 2009 Location: At home
Posts: 12
|
dumb question #2. Where would I find this number?  I have an opportunity to buy one and just don't want to waste my money.
|
|
| |
|
05-05-2010, 03:43 PM
| #4 |
| Pebble Pounder Join Date: Feb 2009 Location: LeMars, Iowa
Posts: 158
|
Model # was on the box for mine. From what I've read so far, if it was originally meant for a summit, it's the wrong one. Receiver should only be a 4 channel, with two channel 1 slots (dual steering servo hookup). The summit receivers, I'm told, have 5 channel slots, also with two channel 1's. Not much help, but best I can tell ya. Good luck!  |
|
| |
|
05-05-2010, 08:08 PM
| #5 | |
| Rock Crawler Join Date: Feb 2004 Location: Michigan
Posts: 567
| Quote:
| |
|
| |
|
| |
Linear Mode
