|
| LinkBack | Thread Tools | Display Modes |
09-30-2010, 02:37 AM | #1 |
Newbie Join Date: May 2007 Location: hind head uk
Posts: 28
| Speed Passion Cirtix Rhino Rock Crawler combo
anyone used one these and what are your thoughts about it http://www.speedpassion.net/en/produ...93301RRC&c=CMB |
Sponsored Links | |
09-30-2010, 09:10 PM | #2 |
RCC Addict Join Date: Jul 2008 Location: San Diego
Posts: 1,144
|
I ordered one today. Will be here in one week. After talking to them(speed passion) you can run it on a 3 cell LIPO. They said to run it 2-3 minutes and check to make sure it not hotter then 80 degrees. I'm going to install it in my honcho. I read somewhere in a post that a guy had one and really likes it. I just wanted more wheel speed in my crawler. I will post latter to see how hot it get when I run it. Most my crawlers are geared low. They said not to over gear it!
|
10-01-2010, 10:12 AM | #3 |
I wanna be Dave Join Date: Dec 2008 Location: Madrid, IA
Posts: 2,015
|
it looks to be decent but that motor is goin to be slow its only 1000kv which is 12600rpm on 3s lipo, the novak crawler 21.5 with the 14mm rotor is faster than it and its fairly slow. i ran a normal 21.5t with 1800kv on 3s and it was ok (22680rpm) but now i went to a novak 18.5t silver can crawler motor rated at 2700kv and it has good torque and plenty of wheel speed on 3s so it does 34000rpm
|
02-13-2011, 10:20 PM | #4 |
RCC Addict Join Date: Jul 2008 Location: San Diego
Posts: 1,144
|
Update It runs good. I was running 23 pinion and 81 spur gear which is too high. Im going to try a 21 pinion and 81 nex weekend.
|
04-24-2011, 08:15 AM | #5 |
Rock Stacker Join Date: Nov 2010 Location: Russia
Posts: 87
|
any opinions?
|
04-24-2011, 08:37 AM | #6 |
I wanna be Dave Join Date: Dec 2008 Location: ?
Posts: 5,055
| |
04-24-2011, 04:55 PM | #7 |
Quarry Creeper Join Date: Oct 2010 Location: Grandview, IA
Posts: 356
|
I really love their line of Cirtix motors for non crawlin applications, I have their 4000kv Cirtix in my Slash. So I'm hoping this combo will be good as well.
|
11-12-2011, 03:33 PM | #8 |
RCC Addict Join Date: Jul 2011 Location: Orlando
Posts: 1,153
|
Is there any update to this Combo, does anyone have any opinion on it? I can get this Combo local for 70 bucks new. Its the Citrix Rhino Rock Crawler ESC and 1000kv motor sensored. Just curious if its worth the buy, since motors are usually 40+ just for a brushed motor. Figured it wasnt a bad purchase. Any help or opinions would be good. Thanks
|
12-28-2011, 10:12 AM | #9 |
RCC Addict Join Date: Dec 2011 Location: Raleign
Posts: 1,439
| Re: Speed Passion Cirtix Rhino Rock Crawler combo
There are a few places selling the older 1100kv motor too. I had posted in another thread where someone was asking if that was any good and I was wondering the same about this pack. Does it come with the sensor wire and all that? For $70 it's a pretty good deal. Would consider two for my XR10 that is sitting patiently on my shelf waiting to be assembled.
|
12-30-2011, 05:11 PM | #10 |
Newbie Join Date: Dec 2011 Location: Soddy Daisy
Posts: 21
| Re: Speed Passion Cirtix Rhino Rock Crawler combo
I ran across this motor esc combo for $70 also. What trucks or rigs are you guys running this setup in?
|
| |