| |
12-30-2010, 10:17 PM
| #1 |
| Rock Stacker Join Date: Oct 2010 Location: Knoxville
Posts: 65
|  VXL-3s blinking green I used my truck tuesday with no problem. Pulled it out to run today and my esc is blinking green rapidly. My transmitter light is solid and ive been able to make it fault with the throttle trim and fix it but my esc continues to blink green. I reset my transmitter to default and the esc still blinks green. i tried to re-link my tx and rx to no avail. I'm out of ideas and plan on calling traxxas tomorrow unless anyone can think of something else to try. thanx for any suggestions. |
|  |
| Sponsored Links | |
| | |
|
12-30-2010, 10:23 PM
| #2 |
| MODERATOR™   Join Date: Jul 2004 Location: Ohio
Posts: 18,928
| |
|
| |
|
12-30-2010, 10:32 PM
| #3 |
| Pebble Pounder Join Date: Nov 2010 Location: USA
Posts: 119
|
check your throttle trim settings.
|
|
| |
|
12-30-2010, 10:34 PM
| #4 |
| Rock Stacker Join Date: Oct 2010 Location: Knoxville
Posts: 65
|
So...I got pissed off, tore everything apart and decided to redo my wiring from scratch just to make sure that something hadnt worked loose. When i opened the boxk holding my rx i found my problem. I waterproofed my rx by putting it in a small plastic bag, taped the wires, taped the bag, ziptied the bag and tape to keep it tight. then i got into the bag it was wet on the inside. dried out my rx and all is well. thanx for the link though.
|
|
| |
 |
| |
Linear Mode
