3 Postion Switch mods: TQ3, DX3E, etc.

[losikid]

Ok guys i'v been thinking it over and seem to get quite a few requests on how to put in 3 position switch, or what what parts to get, etc. So i'm gonna order parts for 3 position mods for the AM TQ and for the DX3E. The TQ will have epa's all wired into, and it will be compatible with stick radios or anything that uses an analog channel...has 3 wires (gnd, signal, +5v). The 3E will just to simply move the switch from the very uncomfortable spot down to the handle...but both can still be used.

So my questions are,

-what other radios can be modded to a 3 position, that is different than a tq mod.

-and whats preferences on the mods, switches that spring back to center or stay put, where to mount the epa's, etc.?

-and finally how much interest, interest will be a huge determining factor on price as its easier/quicker to do a assembly line build up instead of 1-2 at a time.

Thanks,

[ratterd]

Did the DX3E toggle switch mod ever happen?

[losikid]

Originally Posted by ratterd

Did the DX3E toggle switch mod ever happen?

Nope, but I'll try and get info up on how todo it. It's real simple

[ratterd]

Well my local Hobby shop was able to mimic the origanel switch with a 3 way toggle switch (momentary 3 way)But what I am looking to do is hold the toggle in front dig and have dig,But when I release the switch I want it to go back to 4WD automaticly.Is this possible

[losikid]

Originally Posted by ratterd

Well my local Hobby shop was able to mimic the origanel switch with a 3 way toggle switch (momentary 3 way)But what I am looking to do is hold the toggle in front dig and have dig,But when I release the switch I want it to go back to 4WD automaticly.Is this possible

Not easily possible.