03-12-2011, 09:16 PM | #1 |
Newbie Join Date: Sep 2010 Location: Aurora, Indiana
Posts: 49
| 4pk on a micro
posted int he micro section, but figured maybe id have better luck here. Anyone ran a losi micro crawler with a 4pk? I got a 4pk sitting around from Christmas, and since my xr10 is on hold for awhile, im wanting to see if i could use it on my micro, just have no clue where to start |
Sponsored Links | |
03-12-2011, 11:11 PM | #2 |
Quarry Creeper Join Date: Feb 2011 Location: Vancouver, WA
Posts: 423
|
Just take the receiver out of the micro and put in your new futaba receiver then setup your radio accordingly. All the connections for the servo and esc are standard so it's a simple swap job.
|
03-13-2011, 08:47 AM | #3 |
Newbie Join Date: Sep 2010 Location: Aurora, Indiana
Posts: 49
|
some of the things are hard wired tho, so they dont just unplug. the steering servo is the only thing that will unplug
Last edited by humanmachinehead; 03-13-2011 at 08:50 AM. |
03-14-2011, 02:47 AM | #4 |
Quarry Creeper Join Date: Feb 2011 Location: Vancouver, WA
Posts: 423
|
Sorry for the bad advice, I didn't realize it had a integrated esc/rx. Doesn't look like there is an option without replacing the esc. You might want to ask in the losi micro crawler forum, I tried searching in there but didn't turn up anything so unless there is a hack of some sort looks like a new esc would be your only option.
|
03-14-2011, 10:48 AM | #5 |
I wanna be Dave Join Date: Dec 2008 Location: Madrid, IA
Posts: 2,015
|
the only way you can run it with your 4pk is to get a new esc for it to plug into your futaba rx along with the steering servo
|
| |